TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Technische Chemie erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Robert Liska
E163 - Institut für Angewandte Synthesechemie
als Autorin / Autor bzw. wesentlich beteiligte Person

1015 Datensätze (2001 - 2017)

Die Publikationen der Fakultät für Technische Chemie sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Bücher und Buch-Herausgaben


J. Stampfl, R. Liska, A. Ovsianikov (Hrg.):
"Multiphoton Lithography: Techniques, Materials and Applications";
Wiley-VCH, Boschstraße 12, 69469 Weinheim Deutschland, 2016, ISBN: 978-3-527-33717-0; 408 S.


Zeitschriftenartikel


A. Ajami, W. Husinsky, M. Tromayer, P. Gruber, R. Liska, A. Ovsianikov:
"Measurement of degenerate two-photon absorption spectra of a series of developed two-photon initiators using a dispersive white light continuum Z-scan";
Applied Physics Letters, 111 (2017), S. 0719011 - 0719014.

L. Brigo, A. Urciuolo, S. Giulitti, D. Della Giustina, M. Tromayer, R. Liska, N. Elvassore, G. Brusatin:
"3D high-​resolution two-​photon crosslinked hydrogel structures for biological studies";
Acta Biomaterialia, 55 (2017), S. 373 - 384.

Y. Catel, P. Fässler, U. Fischer, C. Gorsche, S. Schörpf, S. Tauscher, R. Liska, N. Moszner:
"Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites";
Macromolecular Materials and Engineering, 302 (2017), 4; S. 1700021 - 1700031.

G. Della Giustina, S. Giulitti, L. Brigo, M. Zanatta, M. Tromayer, R. Liska, N. Elvassore, G. Brusatin:
"Hydrogel with Orthogonal Reactive Units: 2D and 3D Cross-​Linking Modulation";
Macromolecular Rapid Communications, 38 (2017), 1; S. 1600570.

C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions";
Analytical Chemistry, 89 (2017), 9; S. 4958 - 4968.

N. Klikovits, P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel photoacid generators for cationic photopolymerization";
Polymer Chemistry, 30 (2017), 30; S. 4414 - 4421.

N. Klikovits, R. Liska, A. D´Anna, M. Sangermano:
"Successful UV-​Induced RICFP of Epoxy-​Composites";
Macromolecular Chemistry and Physics, 218 (2017), 18; S. 1700313 - 1700316.

S. Ligon, R. Liska, J. Stampfl, M. Gurr, R. Mulhaupt:
"Polymers for 3D Printing and Customized Additive Manufacturing";
Chemical Reviews, 117 (2017), 15; S. 10212 - 10290.

M. Mitterbauer, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Tetrakis(2,4,6-Trimethylbenzoyl)Silane-A Novel Photoinitiator for Visible Light Curing";
Macromolecular Materials and Engineering, 302 (2017), 5; S. 1600536 - 1600542.

J. Radebner, A. Eibel, M. Leypold, C. Gorsche, L. Schuh, R. Fischer, A. Torvisco, D. Neshchadin, R. Geier, N. Moszner, R. Liska, G. Gescheidt, M. Haas, H. Stüger:
"Tetraacylgermanes: Highly Efficient Photoinitiators for Visible-Light-Induced Free-Radical Polymerization";
Angewandte Chemie - International Edition, 56 (2017), 11; S. 3103 - 3107.

S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
"Metallo-​Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation";
angenommen für Angewandte Chemie International Edition 56 (2017), 43; S. 1 - 6.

M. Tromayer, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, A. Ovsianikov, R. Liska:
"A biocompatible macromolecular two-​photon initiator based on hyaluronan";
Polymer Chemistry, 8 (2017), 2; S. 451 - 460.

J. Van Hoorick, P. Gruber, M. Markovic, M. Tromayer, J. Van Erps, H. Thienpont, R. Liska, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Cross-​Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-​Photon Polymerization Potential Quick View Other Sources";
Biomacromolecules, 18 (2017), 10; S. 3260 - 3272.

S. Baudis, D. Bomze, M. Markovic, P. Gruber, A. Ovsianikov, R. Liska:
"Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol)";
Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 13; S. 2060 - 2070.

D. Bomze, P. Knaack, T. Koch, H. Jin, R. Liska:
"Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production";
Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 23; S. 3751 - 3759.

B. Dereka, A. Rosspeintner, L. Zhiquan, R. Liska, E. Vauthey:
"Direct Visualization of Excited-​State Symmetry Breaking Using Ultrafast Time-​Resolved Infrared Spectroscopy";
Journal of the American Chemical Society, 138 (2016), 13; S. 4643 - 4649.

M. Enayati, M. Eilenberg, C. Grasl, P. Riedl, C. Kaun, B. Messner, I. Walter, R. Liska, H. Schima, J. Wojta, K Podesser, H. Bergmeister:
"Biocompatibility Assessment of a New Biodegradable Vascular Graft via In Vitro Co-​culture Approaches and In Vivo Model";
Annals of Biomedical Engineering, 341 (2016), 44; S. 1 - 16.

P. Gauss, S. Ligon, M. Griesser, C. Gorsche, H. Svajdlenková, T. Koch, N. Moszner, R. Liska:
"The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks";
Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 10; S. 1417 - 1427.

C. Gorsche, K. Seidler, P. Knaack, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Rapid formation of regulated methacrylate networks yielding tough materials for lithography-​based 3D printing";
Polymer Chemistry, 7 (2016), 11; S. 2009 - 2014.

M. Leitgeb, D. Nees, S. Ruttloff, U. Palfinger, J. Götz, R. Liska, R. Belegratis, B. Stadlober:
"Multilength Scale Patterning of Functional Layers by Roll-​to-​Roll Ultraviolet-​Light-​Assisted Nanoimprint Lithography";
ACS Nano, 10 (2016), 5; S. 4926 - 4941.

S. Ligon, M. Schwentenwein, C. Gorsche, J. Stampfl, R. Liska:
"Toughening of photo-curable polymer networks: a review";
Polymer Chemistry, 7 (2016), S. 257 - 286.

S. Ligon, K. Seidler, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Allyl sulfides and α-substituted acrylates as addition-fragmentation chain transfer agents for methacrylate polymer networks";
Journal of Polymer Science Part A: Polymer Chemistry, 53 (2016), 3; S. 394 - 406.

A. Mautner, B. Steinbauer, S. Orman, G. Russmüller, K. Macfelda, T. Koch, J. Stampfl, R. Liska:
"Tough photopolymers based on vinyl esters for biomedical applications";
Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 13; S. 1987 - 1997.

A. Mautner, B. Steinbauer, G. Russmüller, R. Lieber, T. Koch, J. Stampfl, R. Liska:
"Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications";
Designed Monomers and Polymers, 19 (2016), 5; S. 437 - 444.

A. Oesterreicher, C. Gorsche, S. Ayalur-Karunakaran, A. Moser, M. Edler, G. Pinter, S. Schlögl, R. Liska, T. Griesser:
"Exploring Network Formation of Tough and Biocompatible Thiol-​yne Based Photopolymers";
Macromolecular Rapid Communications, 37 (2016), 20; S. 1701 - 1706.

S. Tauscher, Y. Catel, R. Liska, N. Moszner:
"New Radiopaque Bromine-​Containing Monomers for Dental Restorative Materials";
Macromolecular Materials and Engineering, 301 (2016), 6; S. 733 - 742.

M. Turnsek, P. Krajnc, R. Liska, T. Koch:
"Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors";
Journal of the European Ceramic Society, 36 (2016), S. 1045 - 1051.

A. Ajami, P. Gruber, M. Tromayer, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
"Evidence of concentration dependence of the two-photon absorption cross section: Determining the ``true´´ cross section value";
Optical Materials, 47 (2015), S. 524 - 529.

S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, R. Liska:
"Highly efficient water-soluble visible light photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry, 53 (2015), 24.

H. Bergmeister, N. Seyidova, C. Schreiber, M. Strobl, C. Grasl, I. Walter, B. Messner, S. Baudis, S. Fröhlich, M. Marchetti-Deschmann, M. Griesser, M. di Franco, M. Krssak, R. Liska, H. Schima:
"Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements";
Acta Biomaterialia, 11 (2015), S. 104 - 113.

D. Bomze, P. Knaack, R. Liska:
"Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds";
Polymer Chemistry, 6 (2015), S. 8161 - 8167.

C. Dworak, S. Ligon, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Imidazole-based ionic liquids for free radical photopolymerization";
Designed Monomers and Polymers, 18 (2015), 3; S. 262 - 270.

S. Fröhlich, M. Eilenberg, A. Svirkova, C. Grasl, R. Liska, H. Bergmeister, M. Marchetti-Deschmann:
"Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems";
Analyst, 140 (2015), 17; S. 6089 - 6099.

C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks";
Polymer Chemistry, 6 (2015), S. 2038 - 2047.

J. Kreutzer, X.H. Qin, C. Gorsche, H. Peterlik, R. Liska, U. Schubert:
"Variation of the crosslinking density in cluster-reinforced polymers";
Materials Today Communications, 5 (2015), S. 10 - 17.

M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, P. Gruber, S. Nürnberger, P. Dubruel, S. Van Vlierberghe, R. Liska, A. Ovsianikov:
"Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation";
J. Nanotechnol. Eng. Med, 6 (2015), 2; S. 021001 - 021008.

P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV-Initiated Bubble-Free Frontal Polymerization in Aqueous Conditions";
Macromolecules, 48 (2015), 24; S. 8738 - 8745.

X.H. Qin, K. Labuda, J. Chen, V. Hruschka, A. Khadem, R. Liska, H. Redl, P. Slezak:
"Development of Synthetic Platelet-Activating Hydrogel Matrices to Induce Local Hemostasis";
Advanced Functional Materials, 25 (2015), S. 6606 - 6617.

G. Russmüller, R. Liska, J. Stampfl, C. Heller, A. Mautner et al.:
"3D Printable Biophotopolymers for in vivo Bone Regeneration";
Materials, 8 (2015), S. 3685 - 3700.

S. Benedikt, N. Moszner, R. Liska:
"Benzoyl Phenyltelluride as Highly Reactive Visible-Light TERP-Reagent for Controlled Radical Polymerization";
Macromolecules, 47 (2014), S. 5526 - 5531.

A. Franz, T. Spinell, A. Graf, H. Wutzel, R. Liska, D. Watts, A. Moritz, A. Schedle:
"Cytotoxicity of post and core composites as a function of environmental conditions";
Dental Materials, 30 (2014), 10; S. 1179 - 1186.

C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"β‑Allyl Sulfones as Addition−Fragmentation Chain Transfer Reagents: A Tool for Adjusting Thermal and Mechanical Properties of Dimethacrylate Networks";
Macromolecules, 47 (2014), 21; S. 7327 - 7336.

C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New Generation of Highly Efficient, Long-Wavelength Photoinitiators for Dental Restoratives: From Research to Application";
RadTech Report, 4 (2014), S. 12 - 18.

B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"The formulator´s guide to anti-oxygen inhibition additives";
Progress in Organic Coatings, 77 (2014), S. 1789 - 1798.

S. Ligon, B. Husar, H. Wutzel, R. Holman, R. Liska:
"Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization";
Chemical Reviews, 114 (2014), 1; S. 557 - 589.

A. Ovsianikov, S Mühleder, J. Torgersen, X.H. Qin, L. Zhiquan, S. Van Vlierberghe, P. Dubruel, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Langmuir, 30 (2014), 13; 7 S.

P. Petrochenko, J. Torgersen, P. Gruber, L. Hicks, J. Zheng, G. Kumar, R. Narayan, P. Goering, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells";
Advanced Healthcare Materials, # (2014), #; S. #.

X.H. Qin, P. Gruber, M. Markovic, B. Plochberger, E. Klotzsch, J. Stampfl, A. Ovsianikov, R. Liska:
"Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs";
Polymer Chemistry, 5 (2014), 22; S. 6523 - 6533.

X.H. Qin, A. Ovsianikov, J. Stampfl, R. Liska:
"Additive manufacturing of photosensitive hydrogels for tissue engineering applications";
BioNanoMaterials, 15 (2014), 3-4; S. 49 - 70.

S. Rothemund, T. Aigner, I. Iturmendi, M. Rigau, B. Husar, F. Hildner, E. Oberbauer, M. Prambauer, G. Olawale, R. Forstner, R. Liska, K. Schröder, O. Brüggemann, I. Teasdale:
"Degradable Glycine-Based Photo- Polymerizable Polyphosphazenes for Use as Scaffolds for Tissue Regeneration";
Macromolecular Bioscience, (2014), S. 1 - 13.

M. Susec, R. Liska, G. Russmüller, J. Kotek, P. Krajnc:
"Microcellular Open Porous Monoliths for Cell Growth by Thiol-Ene Polymerization of Low-Toxicity Monomers in High Internal Phase Emulsions";
Macromolecular Bioscience, (2014), S. 1 - 9.

R. Woods, S. Feldbacher, D. Zidar, G. Langer, V. Satzinger, V. Schmidt, N.U Pucher, R. Liska, W. Kern:
"3D optical waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional groupsfunctional groups";
Optical Materials Express, 4 (2014), 3; S. 486 - 498.

H. Bergmeister, M. Strobl, R. Liska, H. Schima:
"Tissue engineering of vascular grafts";
European Surgery, 45 (2013), S. 187 - 193.

P. Esfandiari, S. Ligon, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Efficient Stabilization of Thiol-ene Formulations in Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), S. 4261 - 4266.

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel cross-linkers for asymmetric poly-AMPS-based proton exchange membranes for fuel cells";
Designed Monomers and Polymers, (2013), S. 1 - 8.

J. Kupfmüller, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides";
Designed Monomers and Polymers, (2013), S. 1 - 11.

J. Kupfmüller, K. Stadlmann, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Flexible optical interconnects via thiol-ene two-photon-induced polymerization";
MRS Online Proceedings Library, 1438 Optical Interconnects (2013), S. 1438.

Z. Li, A. Ajami, E. Stankevičius, W. Husinsky, G. Račiukaitis, J. Stampfl, R. Liska, A. Ovsianikov:
"3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
Optical Materials, 35 (2013), S. 1846 - 1851.

Z. Li, N.U Pucher, K. Cicha, J. Torgersen, S. Ligon, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization";
Macromolecules, 46 (2013), 2; S. 352 - 361.

Z. Li, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
"3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
Chemical Communications, 49 (2013), S. 7635 - 7637.

Z. Li, J. Torgersen, A. Ajami, S. Mühleder, X.H. Qin, W. Husinsky, W. Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
"Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
RSC Advances, 36 (2013), S. 15939 - 15946.

D. Neshchadin, A. Rosspeintner, M. Griesser, B. Lang, S. Mosquera-Vazquez, E. Vauthey, V. Gorelik, R. Liska, C. Hametner, B. Ganster, R. Saf, N. Moszner, G. Gescheidt:
"Acylgermanes: Photoinitiators and Sources for Ge-Centered Radicals. Insights into their Reactivity";
Journal of the American Chemical Society, 135 (2013), 46; S. 17314 - 17321.

X.H. Qin, J. Torgersen, R. Saf, S. Mühleder, N.U Pucher, S. Ligon, W. Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
"Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), S. 4799 - 4810.

M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions";
Macromolecular Rapid Communications, 34 (2013), S. 938 - 943.

J. Torgersen, X.H. Qin, Z. Li, A. Ovsianikov, R. Liska, J. Stampfl:
"Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
Advanced Functional Materials, 10 (2013), 6.

S. Baudis, S. Ligon, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Hard-Block Degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Prostheses";
Journal of Polymer Science Part A: Polymer Chemistry, 50 (2012), 7; S. 1272 - 1280.

H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, I. Walter, D. Bernhard, S. Ligon, R. Liska, H. Schima:
"Healing characteristics of nanostructured, bioresorbable vascular substitutes";
Journal of Tissue Engineering and Regenerative Medicine, 6 (2012), Supplement 1; S. 148.

K. Cicha, T. Koch, J. Torgersen, L. Zhiquan, R. Liska, J. Stampfl:
"Young´s modulus measurement of two-photon polymerized microcantilevers by using nanoindentation equipment";
Journal of Applied Physics, 112 (2012), 094906.

R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, A. Boccaccini, R. Liska, J. Stampfl:
"Lithography-based Additive Manufacturing of Cellular Ceramic Structures";
Advanced Engineering Materials, 14 (2012), S. 1052 - 1058.

M. Griesser, C. Dworak, S. Jauk, M. Höfer, A. Rosspeintner, G. Grabner, R. Liska, G. Gescheidt:
"Photoinitiators with β-Phenylogous Cleavage: An Evaluation of Reaction Mechanisms and Performance";
Macromolecules, 45 (2012), 4; S. 1737 - 1745.

M. Griesser, A. Rosspeintner, C. Dworak, M. Höfer, R. Liska, G. Gescheidt:
"Initiators Based on Benzaldoximes: Bimolecular and Covalently Bound Systems";
Macromolecules, 45 (2012), 21; S. 8648 - 8657.

B. Husar, R. Liska:
"Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application";
Chemical Society Reviews, 41 (2012), S. 2395 - 2405.

B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Journal of Tissue Engineering and Regenerative Medicine, 6/Supplement s1/ (2012), S. 370.

S. Ligon, S. Baudis, F. Nehl, H. Bergmeister, A. Nigisch, J. Stampfl, R. Liska, B. Husar:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Journal of Tissue Engineering and Regenerative Medicine, 6 (2012), Supplement 1; S. 301.

A. Mautner, X.H. Qin, B. Kapeller, G. Russmüller, T. Koch, J. Stampfl, R. Liska:
"Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization";
Macromolecular Rapid Communications, 33 (2012), 23; S. 2046 - 2052.

A. Mautner, X.H. Qin, H. Wutzel, B. Kapeller, D. Moser, G. Russmüller, J. Stampfl, R. Liska:
"Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2012), 1; S. 203 - 212.

A. Ovsianikov, Z. Li, A. Ajami, J. Torgersen, W. Husinsky, J. Stampfl, R. Liska:
"3D grafting via three-photon induced photolysis of aromatic azides";
Applied Physics A: Materials Science & Processing, 108 (2012), 1; S. 29 - 34.

A. Ovsianikov, Z. Li, J. Torgersen, J. Stampfl, R. Liska:
"Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry";
Advanced Functional Materials, 22 (2012), 16; S. 3429 - 3433.

A. Ovsianikov, V. Mironov, J. Stampfl, R. Liska:
"Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications";
Expert Review of Medical Devices (eingeladen), 9 (2012), 6; S. 613 - 633.

P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
"Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
Journal of Membrane Science, 401-402 (2012), S. 254 - 261.

C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, M. Stoiber, R. Liska, H. Schima, H. Bergmeister:
"Long-term performance of small diameter vessel grafts";
European Surgery, 44 (2012), Supplement 244/12; S. 7.

C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, I. Walter, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"Long term evaluation of a new synthetic degradable small diameter vascular graft";
European Surgery, 44 (2012), Supplement 245/12; S. 16.

P. Tesavibul, R. Felzmann, S. Gruber, R. Liska, I. Thompson, A. Boccaccini, J. Stampfl:
"Processing of 45S5 Bioglass by lithography-based additive manufacturing";
Materials Letters, 74 (2012), S. 81 - 84.

J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms";
Journal of Biomedical Optics, 17 (2012), 10; S. 1 - 10.

S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering";
Biomedical Materials, 6 (2011), 5.

H. Bergmeister, S. Baudis, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, R. Plasenzotti, R. Liska, H. Schima:
"In vivo evaluation of electrospun, biodegradable and non-degradable elastomeric vascular grafts";
International Journal of Artificial Organs, 34 (2011), 8; S. 641.

K. Cicha, Z. Li, K. Stadlmann, A. Ovsianikov, R. Markut-Kohl, R. Liska, J. Stampfl:
"Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy";
Journal of Applied Physics, 110 (2011), 064911; S. 1 - 5.

A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Frontal Polymerization: Polymerization Induced Destabilization of Peracrylates";
Macromolecular Rapid Communications, 32 (2011), S. 1096 - 1100.

C. Heller, M. Schwentenwein, G. Russmüller, T. Koch, D. Moser, C. Schopper, F. Varga, J. Stampfl, R. Liska:
"Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), 3; S. 650 - 661.

B. Husar, C. Heller, M. Schwentenwein, A. Mautner, F. Varga, T. Koch, J. Stampfl, R. Liska:
"Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), S. 4927 - 4934.

J. Kumpfmüller, K. Stadlmann, V. Satzinger, L. Zhiquan, J. Stampfl, R. Liska:
"Two-photon-induced Microfabrication of Flexible Optical Waveguides";
Journal of Laser Micro Nanoengineering, 6 (2011), 3; S. 195 - 198.

Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gscheidt, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), S. 3688 - 3699.

R. Liska:
"Book Review: "Industrial Photoinitiators: A Technical Guide"";
ChemPhysChem (eingeladen), 6 (2011), S. 1389.

C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"In-vivo evaluation of biodegradable and non-degradable elastomeric vascular grafts";
European Surgery, 43 (2011), Supplement 243/11; S. 23.

S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Macromolecular Symposia, 296 (2010), 1; S. 121 - 126.

C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates";
Journal of Polymer Science Part A: Polymer Chemistry, 13 (2010), 48; S. 2916 - 2924.

C. Dworak, R. Liska:
"Alternative Initiators for Bimolecular Photoinitiating Systems";
Journal of Polymer Science Part A: Polymer Chemistry, 48 (2010), S. 5865 - 5871.

F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-cyclodextrin/methyl methacrylate host/guest complex in the presence of water soluble photoinitiator, thioxanthone-catechol-O,O'-diacetic acid";
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 68 (2010), 1-2; S. 147 - 153.

S. Krivec, N. Matsko, V. Satzinger, N.U Pucher, N. Galler, T. Koch, V. Schmidt, W. Grogger, R. Liska, H. Lichtenegger:
"Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization";
Advanced Functional Materials, 20 (2010), S. 1 - 9.

N. Moszner, I. Lamparth, J. Angermann, U. Fischer, F. Zeuner, T. Bock, R. Liska, V. Rheinberger:
"Synthesis of bis(3-{[2-(allyloxy)ethoxy]methyl}-2,4,6-trimethylbenzoyl)(phenyl)phosphine oxide - a tailor-made photoinitiator for dental adhesives";
Beilstein Journal of Organic Chemistry, 26 (2010), 6; S. 1 - 9.

N.U Pucher, M. Siklos, A. Rosspeintner, A. Ajami, K. Cicha, G. Gscheidt, W. Husinsky, J. Stampfl, R. Liska:
"Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators";
Proc. of LPM2010 - the 11th International Symposium on Laser Precision Microfabrication, - (2010), S. 1 - 6.

S. Baudis, C. Heller, R. Liska, J. Stampfl, H. Bergmeister, G. Weigel:
"(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 10; S. 2664 - 2676.

C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating monomers based on di- and triacryloylated hydroxylamine derivatives";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 2; S. 392 - 403.

M. Griesser, D. Neshchadin, K. Dietliker, N. Moszner, R. Liska:
"Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations";
Angewandte Chemie - International Edition, 48 (2009), S. 9359 - 9361.

C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, J. Stampfl, R. Liska:
"Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), S. 6941 - 6954.

N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process";
Macromolecules, 42 (2009), S. 6519 - 6528.

A. Rosspeintner, M. Griesser, N.U Pucher, K. Iskra, R. Liska, G. Gescheidt:
"Toward the Photoinduced Reactivity of 1,5-Diphenylpenta-1,4-diyn-3-one (DPD): Real-Time Investigations by Magnetic Resonance";
Macromolecules, 42 (2009), S. 8034 - 8038.

M. Schuster, C. Turecek, G. Weigel, R. Saf, J. Stampfl, F. Varga, R. Liska:
"Gelatin-Based Photopolymers for Bone Replacement Materials";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), S. 7078 - 7089.

A. Ajami, M. Rafique, N.U Pucher, S. Bashir, W. Husinsky, R. Liska, R. Inführ, H. Lichtenegger, J. Stampfl, S. Lüftenegger:
"Z-scan measurements of two-photon absorption for ultrashort laser radiation";
Proc. SPIE-International Society for Optical Engineering, 7027 (2008), 70271H; S. 1 - 8.

B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures. V. Diacylgermane Based Photoinitiators for Visible Light Curing";
Macromolecules, 7 (2008), 41; S. 2394 - 2400.

M. Höfer, R. Liska:
"Photochemistry and Initiation Behavior of Phenylethynyl Onium Salts as Cationic Photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), S. 6916 - 6927.

M. Höfer, N. Moszner, R. Liska:
"Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), 20; S. 6916 - 6927.

S. Jauk, R. Liska:
"Photoinitiators with Functional Groups 9: New Derivatives of Covalently Linked Benzophenone-amine Based Photoinitiators";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry, 45 (2008), 10; S. 804 - 810.

F. Karasu, C. Dworak, S. Kopeinig, E. Hummer, N. Arsu, R. Liska:
"Photoinitiating Monomers Based on Diacrylamides";
Macromolecules, 41 (2008), 21; S. 7953 - 7958.

N. Moszner, U. Fischer, B. Ganster, R. Liska, V. Rheinberger:
"Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials";
Dental Materials, 7 (2008), 24; S. 901 - 907.

M. Sandholzer, M. Schuster, F. Varga, R. Liska, C. Slugovc:
"ROMP based photoinitiator-coinitiator systems with improved migration sta";
Journal of Polymer Science Part A: Polymer Chemistry, 11 (2008), 46; S. 3648 - 3661.

B. Seidl, K. Kalinyaprak-Icten, N. Fuß, M. Höfer, R. Liska:
"Photoinitiators with Double and Triple Bonds";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), S. 289 - 301.

J. Stampfl, S. Baudis, C. Heller, R. Liska, A. Neumeister, R. Kling, A. Ostendorf, M. Spitzbart:
"Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography";
Journal of Micromechanics and Microengineering, 18 (2008), 125014.

B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures, 4a Acylgerman-Based Photoinitiator for Visible Light Curing";
Macromolecular Rapid Communications, 29 (2007), S. 57 - 62.

C. Heller, N.U Pucher, B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, L. Kuna, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift";
Journal of Polymer Science Part A: Polymer Chemistry, 45 (2007), S. 3280 - 3291.

R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional polymers by two-photon 3D lithography";
Applied Surface Science, 254 (2007), 4; S. 836 - 840.

R. Liska, M. Schuster, R. Inführ, C. Turecek, C. Fritscher, B. Seidl, V. Schmidt, L. Kuna, A. Haase, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for rapid prototyping";
Journal of Coating Technology and Research, 4 (2007), 4; S. 505 - 510.

M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Polymer Preprints, 48 (2007), S. 925 - 926.

M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry, 44 (2007), 5; S. 547 - 557.

M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents";
Monatshefte für Chemie, 138 (2007), 4; S. 261 - 268.

M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Applied Surface Science, 254 (2007), S. 1131 - 1134.

B. Seidl, R. Liska:
"Mechanistic investigations on a diynone type photoinitiator";
Macromolecular Chemistry and Physics, 208 (2007), 1; S. 44 - 54.

M. Schuster, R. Inführ, C. Turecek, J. Stampfl, A. Varga, R. Liska:
"Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials";
Monatshefte für Chemie, 137 (2006), S. 843 - 853.

B. Seidl, R. Liska, G. Grabner:
"New photocleavable structures III. Photochemistry and photophysics of pyridinol and benzoyl-based photoinitiators";
Journal of Photochemistry and Photobiology A - Chemistry, 180 (2006), S. 109 - 117.

C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts";
Calcified Tissue International, 78 (2006), S. 71 P127.

G. Ullrich, P. Burtscher, U. Salz, N. Moszner, R. Liska:
"Phenylglycine Derivatives as Coinitiators for the Radical Photopolymerization of Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry, 44 (2006), S. 115 - 125.

G. Ullrich, B. Ganster, U. Salz, N. Moszner, R. Liska:
"Photoinitiators With Functional Groups. IX. Hydrophylic Bisacylphosphine Oxides for Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry, 44 (2006), S. 1686 - 1700.

T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers I: Catalytic groups";
European Polymer Journal, 42 (2006), S. 638 - 654.

T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers II: Co-rective groups";
European Polymer Journal, 42 (2006), S. 869 - 882.

S. Jauk, R. Liska:
"Photoinitiators with Functional Groups, 8a - Benzophenone with Covalently Bound Phenylglycine";
Macromolecular Rapid Communications, 26 (2005), S. 1687 - 1692.

S. Knaus, L. Spoljaric-Lukacic, R. Liska, R. Saf:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
European Polymer Journal, 41 (2005), S. 2240 - 2254.

R. Liska, F. Schwager, R. Cano Vives, C. Maier, J. Stampfl:
"Water-soluble photopolymers for rapid prototyping of cellular materials";
Journal of Applied Polymer Science, 97 (2005), S. 2286 - 2298.

R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one: A Highly Efficient Photoinitiator";
Journal of Polymer Science Part A: Polymer Chemistry, 43 (2005), S. 101 - 111.

J. Stampfl, R. Liska:
"New materials for rapid prototyping applications";
Macromolecular Chemistry and Physics, 206 (2005), S. 1253 - 1256.

R. Liska:
"Photoinitiators with Functional Groups. VI. Chemically Bound Sensitizers";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 2285 - 2301.

R. Liska, D. Herzog:
"New Photocleavable Structures: II. alpha-Cleavable Photoinitiators Based on Pyridines";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 752 - 764.

R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for rapid prototyping of cellular structures";
Polymer Preprints, 45 (2004), S. 77 - 78.

R. Liska, B. Seidl:
"1,5-diphenyl-1,4-diyn-3-one, a new and highly efficient photoinitiator";
Polymer Preprints, 45 (2004), S. 31 - 32.

R. Liska, B. Seidl, G. Grabner:
"Laser flash photolysis investigations of pyridine ketones";
Polymer Preprints, 45 (2004), S. 75 - 76.

R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Polymer Preprints, 45 (2004), S. 69 - 70.

J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
"Fabrication and moulding of cellular materials by rapid prototyping";
International Journal of Materials and Product Technology, 21 (2004), 4; S. 285 - 296.

J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
"Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
Macromolecular Symposia, 217 (2004), 1; S. 99 - 107.

G. Ullrich, D. Herzog, R. Liska, P. Burtscher, N. Moszner:
"Photoinitiators with Functional Groups. VII. Covalently Bonded Camphorquinone-Amines";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 4948 - 4963.

R. Liska:
"Photoinitiators with functional groups: V. New water-soluble photoinitiators containing carbohydrate residues and copolymerizable derivates thereof";
Journal of Polymer Science Part A: Polymer Chemistry, 40 (2002), S. 1504 - 1518.

R. Liska:
"New photocleavable structures I: Synthesis of hydroxyalkylphenone analogues electron-rich heterocycles";
Heterocycles, 55 (2001), S. 1475 - 1486.

P. Sulek, S. Knaus, R. Liska:
"Grafting of Functional Maleimides onto Oligo- and Polyolefines";
Macromolecular Symposia, 176 (2001), S. 155 - 165.


Buchbeiträge


S. Ligon, J. Kumpfmüller, N.U Pucher, J. Stampfl, R. Liska:
"Fabrication ofWaveguides and Other Optical Elements by Multiphoton Lithography";
in: "Multiphoton Lithography", Wiley-VCH, Weinheim, 2016, ISBN: 978-3-527-33717-0, S. 267 - 296.

B. Husar, M. Hatzenbichler, V. Mironov, R. Liska, J. Stampfl, A. Ovsianikov:
"Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds";
in: "Biomaterials for Bone Regeneration", herausgegeben von: P. Dubruel and S. V. Vlierberghe; Elsevier Science Ltd., 2014, ISBN: 978-0-85709-804-7, S. 149 - 201.

J. Stampfl, R. Liska:
"Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties";
in: "Stereolithography", P. Bartolo (Hrg.); Springer-Verlag, New York, 2011, ISBN: 978-0-387-92903-3, S. 161 - 182.

J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes", P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.); Springer-Verlag, Berlin, 2011, ISBN: 978-3642119330, S. 105 - 123.

R. Liska, M. Schuster:
"Biocompatible Photopolymers";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 77 - 91.

R. Liska, J. Stampfl:
"Photopolymers for rapid prototyping";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 147 - 173.

N. Moszner, R. Liska:
"Photoinitiators for direct adhesive restorative materials";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 91 - 112.

R. Liska:
"New chromophores for photoinitiators";
in: "Photochemistry and UV Curing: New Trends", herausgegeben von: J.P. Fouassier; Research Signpost, Trivandrum - 695023, Kerala, India, 2006, ISBN: 81-308-0014-4, S. 55 - 67.


Beiträge in Tagungsbänden


N.U Pucher, V. Satzinger, A. Rosspeintner, C. Heller, G. Gescheidt, V. Schmidt, J. Stampfl, R. Liska:
"Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process";
in: "Mater. Res. Soc. Symp. Proc.", herausgegeben von: Materials Research Society; Material Research Society, Warrendale, PA, USA, 2009, (eingeladen), 6 S.

R. Liska, M. Schuster, B. Seidl, R. Inführ, C. Fritscher, J. Stampfl, H. Lichtenegger, C. Turecek, F. Varga, V. Schmidt, L. Kuna, A. Haase:
"New Photopolymers for Rapid Prototyping";
in: "Radcure Coatings and Inks: Cost & Performance", PRA Coatings Technology Centre, Hamton, Middlesex, UK, 2006, ISBN: 0-9551317-3-1, S. 1 - 8.

R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 487 - 494.

S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 373 - 381.

B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Photoinitiator";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 57 - 65.

B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 399 - 406.

B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomere for the Investigation of Initiation Mechanism";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 391 - 398.

G. Ullrich, S. Jauk, R. Liska:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 407 - 414.

G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 415 - 422.

L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polyolefins: Studies on Model Compounds";
in: "World Polymer Congress MACRO 2004 - Congress Proceedings", Centre National de la Recherche Scientific, Paris, France, 2004, 2 S.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


S. Baudis, R. Liska:
"3D Printing of Hydrogels - A new Approach to Manufacture Ceramic Parts and Biocomposites";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 70.

P. Gauss, R. Liska:
"Substituted Cyclohexadienes as Hydrogen Donor in Radical Photopolymerization";
Poster: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 87.

C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"In situ investigation of photopolymerization reactions via real time-NIR/MIR-photorheology";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 11.

D. Grunenberg, C. Gorsche, R. Liska:
"Tough Hyperbranched Polymers via Photopolymerization of Hybrid Oligomers";
Poster: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 86.

N. Klikovits, R. Liska:
"Novel Alkoxyaluminate-based Cationic Photoinitiators";
Poster: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 89.

P. Knaack, D. Bomze, N. Klikovits, I. Krossing, R. Liska:
"New cationic Initiators and Frontal Polymerization";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 41.

M. Kury, R. Liska:
"Toughening of photopolymer Networks using Addition-fragmentation chain transfer Reagents";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "Rad Tech Europe Conference & Exhibition 2017", (2017), S. 13.

O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV curable materials for 3D printing based on renewable resources";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 71.

M. Lunzer, P. Gruber, K. Hölzl, M. Tromayer, M. Markovic, D. Ossipov, A. Ovsianikov, R. Liska:
"Advances in Two-Photon Initiation Based 3D Printing for Biological Applications";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech EuropeConference & Exhibition 2017", (2017), S. 40.

Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-initiated photopolymerization for lithography-based ceramic manufacturing";
Poster: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 88.

C. Schnöll, R. Liska:
"Debonding on demand: irreversible approach via thermally induced gas formation & network regulation";
Vortrag: RadTech Europe Conference & Exhibition 2017, Prag; 17.10.2017 - 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017", (2017), S. 51.

E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid";
Vortrag: AMBA 2017, Advanced Materials for Biomedical Applications, Ghent, Belgium; 27.09.2017 - 29.09.2017; in: "AMBA 2017, Advanced Materials for Biomedical Applications", (2017), S. 62.

S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells";
Vortrag: 17. Österreichische Chemietage 2017, Salzburg; 25.09.2017 - 28.09.2017; in: "17. Österreichische Chemietage 2017", (2017), S. OP-29.

S. Baudis, H. Bergmeister, K. Ehrmann, C. Dworak, C. Grasl, R. Liska:
"Enhancement of Mechanical Properties of Biogradable Thermoplastic Polyurethane Polymers for Their Application as Artificial Blood Vessel";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-7.

S. Baudis, A. Ovsianikov, J. Stampfl, R. Liska:
"3D Printed Biocompatible Polymers";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-30.

A. Dobos, M. Tromayer, P. Gruber, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Comparason of the effect of photoinitiator P2CK and AS/ on the Viablitiy of Encapsulated Human Adipose-Derivet Stem Cells via Two-Photon Polymerization";
Poster: Donau Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017", Book of Abstract, (2017), S. PO-5.

P. Gauss, P. Knaack, R. Liska:
"Silycyclohexadiens as Anti Oxygen Inhibition and Chain Transfer Reagents";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-79.

C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"Real Time Monitoring of Photopolymerization Reactions via NIR/MIR-Photorheology";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-72.

P. Gruber, M. Markovic, L. Kain, O.G. Andriotis, M. Tromayer, P. Dubruel, S. van Vlierberghe, P.J. Thurner, R. Liska, A. Ovsianikov:
"Stiffness Guided Cell Migration in 3D Hydrogels via Multiphoton Grafting";
Poster: Donau Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017", Book of Abstract, (2017), S. PO-8.

D. Grunenberg, C. Gorsche, R. Liska:
"Toughening Photopolymers: The Concept of Hybrid Oligomers";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-91.

M. Heinze, D. Pospiech, B. Voit, S. Baudis, R. Liska, A. Naumova, K. Saalwächter:
"Influence of Preparation Conditions on the Structure of Photocrosslinked Solvogels";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-36.

S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Design and Synthesis of Tailor-made Nanostructured Polymer Biointerfaces";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-11.

K. Hölzl, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, H. Redl, S. Nürnberger, A. Ovsianikov:
"Photosensitive Gelatin-Methacrylamide in 3D cell culture";
Poster: Donau Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017", Book of Abstract, (2017), S. PO-13.

N. Klikovits, P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel photoacid generator for cationic photopolymerization";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-87.

P. Knaack, D. Bomze, W. Kern, R. Liska:
"Radical Induced Cationic Frontal Polymerization of Epoxy Resins";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-86.

M. Kury, K. Seidler, P. Gauss, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Modification of (Meth)Acrylate-Based Photopolymer Networks Using Addition-Fragmentation Chain Transfer Reagents";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-90.

O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV Curable Materials from Tailored Lignin (Meth)Acrylates";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-19.

M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, A. Ovsianikov, R. Liska:
"Micropatterning of Hydrogels by Sensitized Two-Photon Cleavage of o-Nitrobenzyl Crosslinkages";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-33.

D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"3D Printed Hydrogels for microfluidici Barrier Models";
Poster: Donau Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017", Book of Abstract, (2017), S. PO-20.

M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Encapsulation oh Huan Adipose-Derivet Stem Cells in Gelatin-Methacrylate Based Hydrogel for Tissue Engineering Applications";
Poster: Donau Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017", M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov (Hrg.); Book of Abstract, (2017), S. PO-21.

Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-initiated photopolymerization for lithography-based ceramic manufacturing";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-75.

M. Mitterbauer, P. Knaack, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Tetrakis(2,4,6-trimethylbenzoyl)silane as photoinitiator in visible light dental curing";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-76.

S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts, (2017), ISBN: 978-3-9504017-6-9; S. PO 44.

R. Reichsöllner, X.H. Qin, K. Labuda, J. Chen, V. Hruschka, A. Khadem, S. Baudis, R. Liska, H. Redl, P. Slezak:
"Novel, Bio-Compatible Peptide-Conjugates for Hemostasis";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-89.

C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Introducing Highly Crosslinked Photopolymers with Debonding on Demand Properties";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-6.

S. Stanic, A. Altun, D. Reicharlzeder, M. Schwentenwein, S. Baudis, J. Stampfl, R. Liska:
"Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-24.

W. Steiger, P. Gruber, M. Tromayer, M. Lunzer, A. Ajami, W. Husinsky, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Vortrag: Danube Vltava Sava Polymer meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Fully Automated Z-Scan Setup Based on a Tunable FS-Oscillator", (2017), S. OP-102.

P. Steinbauer, C. Dworak, P.J. Thurner, O.G. Andriotis, R. Liska:
"Phosporus-Based Raft Polymers for Bio Adhesion";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-25.

B. Steyrer, R. Liska, J. Stampfl:
"Thermoplasts as Toughening Agent for 3D-Printable Photopolymers";
Vortrag: DVSPM 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM", Book-of-Abstracts.com, Gumpoldskirchen-Austria (2017), ISBN: 978-3-9504017-6-9; S. OP-4.

H. Svajdlenková, O. Sausa, M. Selvek, T. Koch, C. Gorsche, R. Liska:
"Free Volume Study of Dimethacrylates by PALS";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-73.

L. Vojtova, E. Habankova, L. Michlovska, R. Liska, J. Jancar, S. Baudis:
"Hybrid Hydrogel's Network Formed by Photogelation of Thermosensitive Macromonomer in Aquateous Environment";
Poster: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. PO-28.

E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid";
Vortrag: Danube Vltava Sava Polymer Meeting 2017, Wien; 05.09.2017 - 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017", Book of Abstracts.com, (2017), ISBN: 978-3-9504017-6-9; S. OP-32.

Y. Catel, P. Fässler, U. Fischer, C. Gorsche, S. Schörpf, S. Tauscher, R. Liska, N. Moszner:
"Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites";
Poster: EPF 2017, European Polymer Congress, Lyon; 02.07.2017 - 07.07.2017; in: "16th EPF European Polymer Congress", (2017), S. 57.

S. Brkic, E. Bovo, P. Gruber, M. Markovic, O. Doriana, T. Flora, M. Asthana, G. Roberto, P. Abhay, J. Rodriguez-Cabello, R. Liska, A. Ovsianikov, A. Banfi:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Vortrag: eCM Meeting Abstracts 2017, Davos; 26.06.2017 - 30.06.2017; in: "eCM Meeting Abstracts 2017, Collection 2; TERMIS EU", eCM Meeting Abstracts, Collection 2; TERMIS EU (2017), S. 0141.

S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, D. Ret, M. Sauer, R. Liska:
"Synthesis and Characterization of Polymer Linker Systems for Cell Studies";
Vortrag: Bypos Workshop 2017, Zemplínská Sírava, Slovakia; 12.06.2017 - 16.06.2017; in: "Bypos Workshop Book 2017", (2017), S. 29.

O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process";
Vortrag: Bypos Workshop 2017, Zemplínská Sírava, Slovakia; 12.06.2017 - 16.06.2017; in: "Bypos Workshop Book 2017", (2017), S. 55.

Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-Initiated Photopolymerisation in Filled Systems";
Vortrag: Bypos Workshop 2017, Zemplínská Sírava, Slovakia; 12.06.2017 - 16.06.2017; in: "Bypos Workshop Book 2017", book of abstracts, (2017), S. 57.

S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing";
Vortrag: Bypos Workshop 2017, Zemplínská Sírava, Slovakia; 12.06.2017 - 16.06.2017; in: "Bypos Workshop Book 2017", (2017), S. 53.

S. Stanic, S. Baudis, M. Schwentenwein, R. Liska:
"3D printing of filled hydrogels as ceramic precursors and biocomposites";
Vortrag: Bypos Workshop 2017, Zemplínská Sírava, Slovakia; 12.06.2017 - 16.06.2017; in: "Bypos Workshop Book 2017", (2017), S. 31.

S. Baudis, E. Zerobin, M. Lunzer, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Microfabricated Biocompatible Hydrogels";
Vortrag: VSS 2017 - Vienna young Scientists Symposium, Wien; 01.06.2017 - 02.06.2017; in: "VSS 2017", (2017), ISBN: 978-3-9504017-5-2; S. 11.

S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry";
Vortrag: 12th International Conference on Advanced Polymers via Macromolecular Engineering, Ghent; 21.05.2017 - 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering", (2017), S. 91.

C. Gorsche, K. Seidler, M. Kury, J. Steindl, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"The power of chain transfer in the field of photopolymer applications";
Poster: 12th International Conference on Advanced Polymers via Macromolecular Engineering, Ghent; 21.05.2017 - 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering", Advanced Polymers via Macromolecular Engineering, Nr.12, Ghent, Belgium (2017), S. 143.

S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Synthesis and Characterization of Polymer Linker systems for T-cell activation";
Poster: 12th International Conference on Advanced Polymers via Macromolecular Engineering, Ghent; 21.05.2017 - 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering", (2017), S. 133.

P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Progress in Cationic Photopolymerization";
Vortrag: European Coatings Show and Conference 2017, Nürnberg; 02.04.2017 - 06.04.2017; in: "European Coatings Journal 04-2017", Vincentz Network GmbH & Co. KG, Hannover (Deutschland), 04/2017 (2017), ISSN: 0930-3847; S. 102.

K. Seidler, P. Gauss, M. Kury, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, C. Gorsche, N. Moszner, R. Liska:
"Tough and low shrinkage photopolymers";
Vortrag: European Coatings Show and Conference 2017, Nürnberg (eingeladen); 02.04.2017 - 06.04.2017; in: "European Coatings Journal 04-2017", Vincentz Network GmbH & Co. KG, Hannover (Deutschland), 04/2017 (2017), ISSN: 0930-3847; S. 96.

P. Gruber, M. Markovic, M. Tromayer, S Mühleder, J. Van Hoorick, K. Hölzl, W Holnthoner, H. Redl, P. Dubruel, R. Liska, S. Van Vlierberghe, A. Ovsianikov:
"Laser photofabrication of 3D hydrogel structures within microfluidic channels";
Vortrag: International Conference on Biofabrication 2016, Winston-Salem, North Carolina, USA; 29.10.2016 - 31.10.2016; in: "Biofabrication 2016", elsevier, (2016), S. OP-16.

C. Gorsche, K. Seidler, H. Reghunathan, P. Gauss, M. Kury, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer: Enriching the field of photopolymer applications";
Vortrag: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. O-7.

G. Harakaly, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Formation of tough photopolymer networks using addition fragmentation chain transfer: A viable concept for lithography based 3D printing";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-55.

A. Hofecker, P. Knaack, R. Liska:
"New Approaches for the Synthesis of low toxic Vinyl ester-based Monomers";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-51.

P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Advances in Cationic Photopolymerization";
Vortrag: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. O-9.

M. Kury, K. Seidler, A. Svirkova, M. Marchetti-Deschmann, T. Koch, C. Gorsche, R. Liska:
"Addition-Fragmentation Chain Transfer Reagents in Photopolymerization of Acrylates";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-57.

R. Liska:
"Advanced techniques for Photocuring of Hydrogels";
Vortrag: 4th European Symposium of Photopolymer Science, Leipzig (eingeladen); 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. IL-3.

M. Mitterbauer, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Visible light photoinitiators based on silicon for the curing of dental formulations";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-14.

S. Orman, A. Mautner, S. Baudis, G. Russmüller, M. Schwentenwein, R. Liska:
"Additive Manufactured Vinyl Ester-based Photopolymers with Improved Impact Resistance";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-42.

C. Schnöll, C. Gorsche, N. Moszner, R. Liska:
"Debonding on Demand (DoD) via thermally induced gas formation using blocked isocyanates";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-43.

M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, W. Steiger, S. Naumov, T. Scherzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel Two-Photon Initiators Based on Cleavable Diazosulfones";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-21.

M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, S. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Biocompatible Two-Photon Initiator with Hyaluronan Backbone";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-37.

E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid";
Poster: 4th European Symposium of Photopolymer Science, Leipzig; 11.09.2016 - 14.09.2016; in: "ESPS 2016", (2016), S. P-34.

P. Gauss, K. Seidler, H. Reghunathan, M. Kury, A. Svirkova, M. Marchetti-Deschmann, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
"Tailored Photopolymer Networks Using Addition Fragmentation Chain Transfer";
Vortrag: XXII. Bratislava International Conference on Macromolecules, Bratislava; 06.09.2016 - 09.09.2016; in: "BIMac 2016 Programme Book and Book of Abstracts", (2016), ISBN: 978-80-89841-01-1; S. 12.

S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Laser-microfabricated, biocompatible hydrogels based on hyaluronan";
Poster: TERMIS-EU 2016 conference, Uppsala, Sweden; 28.06.2016 - 01.07.2016; in: "European Cells&Materials Journal", European Cells&Materials Journal, Vol. 31. Suppl. 1, 2016, page P454 (2016), ISSN: 1473-2262; S. 454.

K. Hölzl, M. Markovic, P. Gruber, J. Van Hoorick, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Photosensitive gelatine-methacrylamide as engineered extracellular matrix for three-dimensional cell culture";
Poster: TERMIS-EU 2016 Conference, Uppsala; 28.06.2016 - 01.07.2016; in: "Towards Future Regenerative Therapies", European Cells and Materials Journal, 31 (2016), ISSN: 1473-2262; S. 215.

M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, M. Tromayer, J. Stampfl, R. Liska, A. Ovsianikov:
"Promoted two-photon induced cleavage of o-nitrobenzyl linkages in a hyaluronic acid based hydrogel by a two-photon initiator";
Vortrag: TERMIS-EU 2016 conference, Uppsala, Sweden; 28.06.2016 - 01.07.2016; in: "TERMIS-EU 2016 Conference", European Cells&Materials Journal, Vol. 31. Suppl. 1, 2016 (2016), ISSN: 1473-2262; S. 42.

M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, P. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel biocompatible two-photon initiator based on hyaluronan";
Poster: TERMIS-EU 2016 conference, Uppsala, Sweden; 28.06.2016 - 01.07.2016; in: "TERMIS-EU 2016 conference", European Cells&Materials Journal, Vol. 31. Suppl. 1, 2016 (2016), ISSN: 1473-2262; S. 481.

S. Baudis, D. Bomze, M. Lunzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs";
Poster: 10th World Biomaterials Congress, Montreal, Canada; 17.05.2016 - 22.05.2016; in: "Book of Abstracts", (2016), S. 2693.

S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid";
Poster: 10th World Biomaterials Congress, Montreal, Canada; 17.05.2016 - 22.05.2016; in: "Book of Abstracts", (2016), S. 2728.

M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, J. Stampfl, R. Liska, A. Ovsianikov:
"Two-photon degradation of a hyaluronic acid based hydrogel using a two-photon initiator as photosensitizer";
Vortrag: 10th World Biomaterials Congress, Montreal, Canada; 17.05.2016 - 22.05.2016; in: "Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.", Conference Abstract: 10th World Biomaterials Congress/Frontiers, (2016).

M. Tromayer, P. Gruber, K. Hölzl, M. Markovic, S. Vlierberghe, A. Ovsianikov, P. Dubruel, J. Stampfl, R. Liska:
"Hyaluronan-Based Two-Photon Initiator with Enhanced Biocompatibility";
Poster: 10th World Biomaterials Congress, Montreal, Canada; 17.05.2016 - 22.05.2016; in: "Book of Abstracts", (2016), S. 1807.

C. Gorsche, P. Knaack, D. Bomze, K. Seidler, P. Gauss, M. Griesser, I. Krossing, T. Koch, N. Moszner, R. Liska:
"Toughening of Radical Photopolymer Networks and Advances in Cationic Photopolymerization";
Vortrag: Noblelight UV Technical Seminar 2016, Tokio; 22.04.2016; in: "21st Noblelight UV Technical Seminar", 21st Noblelight UV Technical Seminar-proceedings, (2016), S. 05.

M. Kury, C. Gorsche, K. Seidler, P. Gauss, T. Koch, R. Liska:
"Addition-fragmentation chain transfer reagents in photopolymerisation of methacrylic monomers";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 95.

M. Mitterbauer, N. Moszner, R. Liska:
"Synthesis of novel si-based long wavelength photoinitiators for dental applications";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 71.

E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Micro fabrication of hydrogels based on hyaluronic acid";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 107.

J. Stampfl, P. Dorfinger, R. Gmeiner, R. Liska:
"Materials development for lithography-based 3D-printing";
Vortrag: Makromolekulares Kolloquium, Freiburg; 24.02.2016 - 26.02.2016; in: "Macromolecular Chemistry and Physics", Wiley-VCH, 2 (2016), S. 90.

S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, K. Hölzl, R. Liska:
"Highly Efficient Cleavable Photoinitiators for Visible Light curing of Aqueous Formulations";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 18.

D. Bomze, P. Knaack, R. Liska:
"Cationic Frontal Polymerization for curing of epoxide resins";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 38.

P. Gauss, C. Gorsche, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 16.

D. Grunenberg, C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"Dimethacrylate Networks with Tunable Properties: The High Effectiveness of β-Allyl Sulfone Chain Transfer Agents";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 83.

G. Harakaly, K. Seidler, M. Griesser, C. Gorsche, J. Stampfl, R. Liska:
"α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 85.

P. Knaack, D. Bomze, I. Krossing, R. Liska:
"New photoacid generator for cationic photopolymerisation";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 63.

M. Lunzer, A. Rosspeintner, B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, E. Vauthey, R. Liska, J. Fröhlich:
"Triarylamine based Materials as Two Photon Absorption Photoinitiators - Adjustment of Molecular Properties";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 84.

P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV Initiated Bubble Free Frontal Polymerization in Aqueos Conditions";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 36.

K. Seidler, C. Gorsche, M. Kury, H. Reghunathan, T. Koch, N. Moszner, R. Liska:
"Toughening of Methacrylate Networks through Addition-Fragmentation Chain Transfer";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 17.

D. Grunenberg, C. Gorsche, M. Griesser, T. Koch, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents";
Poster: BPS 2015, Bayreuth; 20.09.2015 - 22.09.2015; in: "Book of Abstracts", (2015).

S. Baudis, Z. Tomasikova, P. Knaack, X.H. Qin, J. Stampfl, A. Ovsianikov, R. Liska:
"A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Modified Poly(Vinyl Alcohol) based Hydrogels for Tissue Engineering via Thiol-Ene-Crosslinking";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

D. Bomze, P. Knaack, R. Liska:
"Radical Induced Cationic Frontal Polymerization";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Addition Fragmentation Chain Transfer Reagents With Various Activating And Leaving Groups And Their Potential As Network Modifiers";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

C. Gorsche, K. Seidler, P. Gauss, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Tough And Low Shrinkage Photopolymers For 3d-Printing";
Vortrag: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

C. Gorsche, K. Seidler, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Using Addition Fragmentation Chain Transfer For Tough Methacrylate-Based Networks With Low Shrinkage Stress";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel Initiator For Photoinduced Cationic Polymerisation";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

S. Orman, P. Potzmann, A. Samusjew, B. Husar, M. Schwentenwein, T. Koch, J. Stampfl, R. Liska:
"Photopolymerization Of Biocompatible Composites";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

P. Potzmann, F. Lopez Villanueva, R. Liska:
"Investigation Of Bubble Free, UV Initiated Frontal Polymerization In Aqueous Conditions";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).

J. Stampfl, J. Homa, R. Liska:
"Lithography based Additive Manufacturing - Materials and Processes";
Vortrag: ChinaNANO 2015, Beijing; 03.09.2015 - 05.09.2015; in: "The 6th International Conference on Nanoscience & Technology", (2015), S. 179.

C. Gorsche, J. Stampfl, R. Liska:
"Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials";
Vortrag: ISBPPB 2015, Orlando (eingeladen); 08.07.2015 - 10.07.2015; in: "Abstracts", (2015).

P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for SLA";
Vortrag: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015, Wien; 01.07.2015 - 03.07.2015; in: "20th Symposium on Composites", Materials Science Forum, Volumes 825-826 (2015), ISBN: 978-3-03835-515-1; S. 53 - 59.

P. Potzmann, S. Baudis, C. Dworak, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic Polyurethane Elastomers";
Vortrag: 79PMM, Prague; 28.06.2015 - 02.07.2015; in: "79th Prague Meeting on Macromolecules", (2015), ISBN: 978-80-85009-82-8.

Z. Tomasikova, X.H. Qin, P. Gauss, R. Liska:
"3D Printing of biocompatible hydrogels";
Vortrag: 79PMM, Prague; 28.06.2015 - 02.07.2015; in: "79th Prague Meeting on Macromolecules", (2015), ISBN: 978-80-85009-82-8.

S. Benedikt, A. Gugg, U. Fischer, B. Ganster, C. Gorsche, N. Moszner, R. Liska:
"New Photopolymers in digital and restorative dentistry";
Vortrag: VSS 2015, Vienna; 25.06.2015 - 26.06.2015; in: "Book of Abstracts", Richard Zemann, (2015), ISBN: 978-3-9504017-0-7; S. 122 - 123.

C. Gorsche, A. Ovsianikov, J. Stampfl, R. Liska:
"Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing";
Vortrag: VSS 2015, Vienna; 25.06.2015 - 26.06.2015; in: "Book of Abstracts", Richard Zemann, (2015), ISBN: 978-3-9504017-0-7; S. 138 - 139.

P. Gauss, C. Gorsche, N. Moszner, R. Liska:
"β-Allyl sulfones with different activating groups as chain transfer agents in methacrylate photopolymerization";
Poster: P2M Lacanau, Lacanau; 26.05.2015 - 29.05.2015; in: "Book of Abstracts", (2015).

C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, G. Gescheidt, N. Moszner, R. Liska:
"Efficient tuning of (meth)acrylate polymer network architecture for 3D Printing";
Vortrag: P2M Lacanau, Lacanau (eingeladen); 26.05.2015 - 29.05.2015; in: "Abstracts", (2015).

S. Benedikt, N. Moszner, R. Liska:
"Benzoyl pheyltelluride as highly reactive terp-reagent for visible light induced controlled radical polymerization";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 127.

S. Benedikt, N. Moszner, R. Liska:
"Water soluble visible light photoinitiators: li-tpo as highly reactive and soluble compound with extraordinary stability";
Poster: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 127.

D. Bomze, P. Knaack, W. Kern, R. Liska:
"Cationic frontal polymerization for the production of electrical insulating materials";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 62.

P. Gauss, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Tuning β-allyl sulfones as chan transfer agents in dimethacrylic photopolymers";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 69.

S. Orman, B. Husar, M. Schwentenwein, R. Liska:
"Biocompativle photopolymer composites for potential bon replacements";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 22.

K. Seidler, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"The influence of addition-fragmentation-chain-transfer on mechanical properties of methacrylate networks";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 65.

H. Svajdlenková, O. Sausa, C. Gorsche, R. Liska:
"Micro structural pals study of dimethacrylate networks";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 75.

Z. Tomasikova, B. Husar, X.H. Qin, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Hyaluronic acid based hydrogels for two photon lithography";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 59.

S. Fröhlich, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"Protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: OurCon II Imaging Mass Spectrometry Conference, Antalya, Turkey; 18.11.2014 - 21.11.2014; in: "Abstract Book", (2014), S. 55.

R. Liska:
"Advanced Applications of Photopolymerization: 3D Printing of Biomaterials";
Vortrag: 24. Lecture Conference on Photochemistry, Köln (eingeladen); 29.09.2014 - 01.10.2014; in: "24. Lecture Conference of Photochemistry", (2014), S. 50.

P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Vortrag: ICB 2014, Pohang, S. Korea; 28.09.2014 - 01.10.2014; in: "International Conference on Biofabrication", (2014).

P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Poster: 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014), Daegu, S. Korea; 24.09.2014 - 27.09.2014; in: "2", (2014).

S. Benedikt, N. Moszner, R. Liska:
"New And Highly Reactive Visible Light Photoiniferter: Benzoyl Phenyltelluride";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 76.

D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Norbornen Modified Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), S. 147.

D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel Low-Toxic Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 132.

P. Dorfinger, J. Stampfl, R. Liska:
"Toughening Of Photopolymers For Stereolithography (sl)";
Poster: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", ESPS 2014, 1 (2014), ISBN: 978-3-9502992-9-8; S. 25 - 26.

P. Gauss, N. Moszner, R. Liska:
"Beta-Allyl Sulfones As Transfer Agents In Methacrylic Photopolymers";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 164.

C. Gorsche, T. Koch, N. Moszner, J. Stampfl, R. Liska:
"Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 73.

M. Griesser, C. Gorsche, N. Moszner, R. Liska:
"Mechanistic Investigations Of Chain Transfer Reagents";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 112.

M. Griesser, B. Husar, P. Sehnal, K. Harper, A. Rose, D. Anderson, R. Liska:
"A New Variant Of Phosphine Oxide Photoinitiators";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 166.

P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Vortrag: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), S. 167.

B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, R. Liska, J. Fröhlich:
"Initiators For Two Photon Induced Polymerization Based On A Novel Cap-Linker-Cap System";
Poster: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "European Symposium of Photopolymer Science - Abstract Book", (2014), ISBN: 978-3-9502992-9-8; S. PO-37.

E. Horkel, B. Holzer, M. Lunzer, D. Lumpi, M. Tromayer, P. Gruber, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems As Initiators For Two-Photon Induced Polymerization: A Theoretical Approach";
Poster: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science - Abstract Book", (2014), ISBN: 978-3-9502992-9-8; S. PO-38.

B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Monitoring Of Uv-Curing By Real Time Ftir - Photorheology";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 108.

M. Lunzer, B. Holzer, M. Tromayer, D. Lumpi, E. Horkel, R. Liska, J. Fröhlich:
"Synthesis And Characterization Of Novel Cap-Linker-Cap Type Structures As Two-Photon Absorption Photoinitiators";
Poster: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science - Abstract Book", (2014), ISBN: 978-3-9502992-9-8; S. PO-55.

A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Vinyl Esters With Improved Reactivity And Toughness";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska (Hrg.); (2014), ISBN: 978-3-9502992-9-8; S. 71.

S. Orman, A. Samusjew, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 196.

X.H. Qin, K. Labuda, D. Bomze, A. Khadem, P. Slezak, R. Liska, H. Redl:
"ENGINEERED PHOTOCURABLE BIOMATERIALS TO HALT BLEEDINGApplication Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 188.

X.H. Qin, Z. Tomasikova, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 129.

K. Seidler, C. Gorsche, N. Moszner, R. Liska:
"The Effect Of Leaving Groups Of Chain Transfer Agents";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 211.

Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 219.

M. Tromayer, P. Gruber, A. Ajami, A. Rosspeintner, S. Naumov, A. Ovsianikov, J. Stampfl, R. Liska:
"Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 220.

S. Fröhlich, M. Strobl, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"In vivo protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: 8th Central and Eastern European Proteomics Conference, Vienna University of Teechnology (eingeladen); 30.06.2014 - 04.07.2014; in: "Abstractbook", M. Marchetti-Deschmann, G. Allmaier (Hrg.); (2014).

P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: LPM 2014, Vilnius; 17.06.2014 - 20.06.2014; in: "LPM 2014 Program & Technical Digest", (2014), S. 263.

B. Holzer, M. Tromayer, D. Lumpi, A. Ajami, E. Horkel, W. Husinsky, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems as Initiators for Two-Photon Induced-Polymerization";
Poster: LPM 2014, Vilnius; 17.06.2014 - 20.06.2014; in: "LPM 2014 Program & Technical Digest", (2014), S. 260.

D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel low-toxic poly(vinyl alcohol) based hydrogels for tissue engineering via thiol-ene crosslinking";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 57.

Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 91.

N. Zwirchmayr, P. Potzmann, C. Grasl, T. Koch, H. Bergmeister, R. Liska:
"Segmented linear thermoplastic urethane elastomers with novel building blocks for electrospinning of vascular grafts";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 93.

B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Real Time FTIR - Photorheology: A Powerful Tool for Monitoring Changes in Chemical and Viscoelastic Properties During UV-Curing";
Poster: IRDG Spring Meeting Vienna, Wien; 24.04.2014 - 25.04.2014; in: "Program & Poster Abstracts", (2014).

B. Husar, A. Samusjew, T. Koch, J. Stampfl, R. Liska:
"3D fabrication of scaffolds from low cytotoxic vinylester and thiols";
Poster: TERMIS/EU 2014, Genova; 10.06.2014 - 13.06.2014; in: "Meeting Abstracts", J Tissue Eng Regen Med, 8 (Suppl. 1) (2013), ISSN: 1932-7005; S. 447.

X.H. Qin, S. Mühleder, P. Gruber, A. Ovsianikov, H. Redl, R. Liska:
"Design and Synthesis of a Novel Hydrogel Precursor: hyaluronate vinyl esters";
Poster: Advances in Tissue Regeneration 2013, Lattrop; 14.11.2013 - 15.11.2013; in: "Advances in Tissue Regeneration 2013", (2013).

X.H. Qin, S. Mühleder, J. Torgersen, A. Ovsianikov, H. Redl, J. Stampfl, R. Liska:
"3D construction of artifical ECM hydrogels by two-photon-induced polymerization";
Vortrag: Advances in Tissue Regeneration 2013, Lattrop; 14.11.2013 - 15.11.2013; in: "Advances in Tissue Regeneration 2013", (2013).

M. Griesser, G. Gescheidt, R. Liska:
"Elucidating Reaction Mechanisms of Photoinitiators by Magnetic Resonance";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 36.

M. Griesser, A. Rosspeintner, C. Dworak, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Benzaldoxime Esters as Photoinitiators";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 119.

S. Ligon, B. Husar, H. Wutzel, J. Torgersen, R. Liska:
"Developing anti-oxygen inhibition strategies for LED-based wood coatings";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 118.

S. Ligon, M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 88.

P. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Development of a novel photocurable hydrogel precursor";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 121.

P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 117.

X.H. Qin, P. Esfandiari, S. Ligon, A. Ovsianikov, R. Liska:
"Storage Stable Thiol-Ene Formulations and advances applications thereof";
Vortrag: RadTech Europe 2013, Basel (eingeladen); 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 14.

M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Novel Highly Efficient Initiators For Two-Photon Induced Photopolimerization";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 40.

M. Tromayer, A. Mautner, B. Husar, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates with improved mechanical properties";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 120.

R. Gmeiner, E. Fantino, B. Steyrer, A. Samusjew, B. Husar, R. Liska, J. Stampfl:
"Additive Manufacturing of Filled and Unfilled Bio-Photopolymers";
Poster: Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013, Erlangen; 26.09.2013 - 28.09.2013; in: "Bionano-Materials", Bionanomaterials/de Gruyter, 2013/volume 14/number S1 (2013), ISSN: 2193-0651; S. 46.

C. Gorsche, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Moszner, R. Liska:
"Investigating the mechanism and photoreactivity of germanium based long wavelength photoinitiators for dental materials";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).

C. Gorsche, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Efficent synthesis of two-photon initiators via one step aldol condensation";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).

R. Liska:
"Advanced Applications of Storage Stable Thiol-Ene Formulations";
Vortrag: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).

P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).

R. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Hyaluron vinyl esters as novel precursors for photocurable hydrogels";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).

B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material";
Vortrag: 25th European Conference on Biomaterials, Madrid; 08.09.2013 - 12.09.2013; in: "Book of contributions", (2013), ISBN: 978-84-695-7831-5.

X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization";
Poster: 25th European Conference on Biomaterials, Madrid; 08.09.2013 - 12.09.2013; in: "Book of contributions", (2013), ISBN: 978-84-695-7831-5.

M. Lunzer, B. Holzer, D. Lumpi, E. Horkel, R. Liska, J. Fröhlich:
"Synthesis of Novel Cap-Linker-Cap Structures as Potential Initiators For Two-Photon-Induced Polymerization";
Poster: 15th Blue Danube Symposium on Heterocyclic Chemistry, Sept. 1-5, 2013, Olomouc, Czech Republic, Olomouc; 01.09.2013 - 05.09.2013; in: "Book of Abstracts", (2013), ISBN: 978-80-263-0502-6; S. P45.

A. Ovsianikov, K. Haslinger, X.H. Qin, Z. Li, P. Gruber, J. Torgersen, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl:
"Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors";
Vortrag: International Conference on Materials for Advanced Technologies, Singapore; 30.06.2013 - 05.07.2013; in: "ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies", (2013), S. 218.

X.H. Qin, A. Ovsianikov, H. Redl, R. Liska:
"Development of a novel cytocompatible and photopolymerizable hydrogel precursor: hyaluronate vinyl ester";
Poster: 19th Swiss Conference on Biomaterials, Davos; 25.06.2013 - 26.06.2013; in: "Program & Abstract", D. Eglin, M. D´Este, D. Schraner (Hrg.); (2013), S. 19.

X.H. Qin, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ovsianikov, J. Stampfl, H. Redl, R. Liska:
"Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry";
Vortrag: 19th Swiss Conference on Biomaterials, Davos; 25.06.2013 - 26.06.2013; in: "Program & Abstract", D. Eglin, M. D´Este, D. Schraner (Hrg.); (2013), S. 19.

B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Biodegradable Bone Replacement Material From Low Cytotoxic Monomers";
Poster: TERMIS-EU 2013, Istanbul; 17.06.2013 - 20.06.2013; in: "Abstracts", (2013), S. 244.

X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization";
Vortrag: TERMIS-EU 2013, Istanbul; 17.06.2013 - 20.06.2013; in: "Abstracts", (2013), S. 195.

M. Griesser, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Photoinitiators by Magnetic Resonance";
Poster: 6th-Pacific Symposium on Radical Chemistry (6th-PSRC), Vancouver; 16.06.2013 - 20.06.2013; in: "6th Pacific Symposium on Radical Chemistry - Programme", (2013).

M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Acrylate and thiol based highly porous polymers by emulsion templating : lecture at Third International Symposium Frontiers polymer science in association with the journal polymer";
Poster: Third International Symposium Frontiers polymer science in association with the journal polymer, Sitges; 21.05.2013 - 23.05.2013; in: "Programme Booklet", (2013).

B. Husar, A. Mautner, C. Heller, P. Esfandiari, F. Varga, J. Stampfl, R. Liska:
"Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates";
Vortrag: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013; in: "Guide Book", (2013).

S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"An overview of anti-oxygen inhibition strategies for LED-based wood coatings";
Vortrag: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013; in: "Guide Book", (2013).

M. Susec, R. Liska, P. Krajnc:
"Thiol-ene chemistry and emulsion templating for microcellular open porous polymer preparation";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.05.2013 - 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), 978­‐961­‐269­‐992­‐5; 307 S.

M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, R. Liska:
"Preparation and characterization of novel type I/ type II photoinitiators for two-photon submicro-stereolithography";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.05.2013 - 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), 978­‐961­‐269­‐992­‐5; 307 S.

R. Liska:
"Thiol-ene polymerization of biocompatible monomers in additive manufactoring technology";
Hauptvortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled (eingeladen); 03.04.2013 - 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), ISBN: 978-961-269-992-5; S. 7 - 8.

P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, B. Messner, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering";
Vortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.04.2013 - 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), ISBN: 978-961-269-992-5; S. 37 - 38.

H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, B. Kapeller, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, H. Schima:
"Nanostructured, bioresorbable vascular substitutes";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", (2012).

F. Höller, A. Ovsianikov, J. Torgersen, T. Koch, D. Dekel, S. Levenberg, S. Nürnberger, H. Redl, R. Liska, J. Stampfl:
"Laser microfabrication of elastic 3D scaffolds";
Poster: 5. Wiener Biomaterialsymposium, Wien; 19.11.2012 - 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna", (2012), S. 107 - 108.

B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"3D scaffolds from low toxic vinyl carbonates";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 105.

Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Novel water soluble two-photon initiators for 3D scaffold microfabrication";
Vortrag: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "5th Vienna Biomaterialsymposium 19.11.-21.11.2012", J. Stampfl (Hrg.); (2012), S. 95.

R. Liska, C. Gorsche, A. Gugg, J. Stampfl, N. Moszner:
"Future Perspectives of photopolymerization";
Vortrag: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 129.

A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska, J. Stampfl:
"Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry";
Hauptvortrag: 5. Wiener Biomaterialsymposium, Wien (eingeladen); 19.11.2012 - 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna", (2012), S. 15 - 16.

X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 65.

M. Susec, R. Liska, S. Ligon, P. Krajnc:
"Hierarchically porous polymers from divinyladipate and thiols via emulsion templating";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 83.

S. Gruber, J. Torgersen, A. Neumeister, R. Felzmann, R. Liska, J. Stampfl:
"Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources";
Vortrag: 7th International Symposium on Emerging and Industrial DLP® Applications, Frankfurt; 30.10.2012; in: "7th International Symposium on Emerging and Industrial DLP® Applications", (2012).

B. Husar, H. Hoffmann, S. Ligon, R. Liska, H. Wutzel:
"Assessment of effectiveness of various antioxygen inhibition strategies in LED curing";
Vortrag: PRA´s 8th International Woodcoatings Congress, Asterdam; 30.10.2012 - 31.10.2012; in: "Congress Papers", PRA Coatings Technology Centre, Hampton, Middlesex, UK (2012), ISBN: 978-0-9561357-3-5.

M. Hatzenbichler, R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, J. Stampfl, R. Liska:
"Additive Manufacturing of high performance ceramic structures";
Hauptvortrag: 4m 2012, Wien; 09.10.2012 - 11.10.2012; in: "Multi-material Micro Manufacture", H. Noll, N. Adamovic, S. Dimov (Hrg.); Research Publishing, (2012), ISBN: 978-98107-3353-7; S. 16 - 19.

M. Kellner, P. Radovanovic, R. Liska, J. Matovic:
"Novel Crosslinker for Photopolymerization of Proton Conducting Fuel Cell Membranes";
Vortrag: 9th International Conference on Multi-Material Micro Manufacture - 4M 2012, Wien; 09.10.2012 - 11.10.2012; in: "Proceedings of the 9th International Conference on Multi-Material Micro Manufacture", (2012), ISBN: 978-981-07-3353-7; S. 148.

Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization";
Vortrag: 4th Bratislava Young Polymer Scientists workshop, Bratislava; 01.10.2012 - 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop", (2012), ISBN: 978-80-970923-2-0; S. 83.

R. Liska:
"Photopolymerization and additive manufacturing technologies";
Hauptvortrag: 4th Bratislava Young Polymer Scientists workshop, Bratislava (eingeladen); 01.10.2012 - 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop", (2012), ISBN: 978-80-970923-2-0; S. 25.

S. Gruber, R. Felzmann, G. Mitteramskogler, R. Liska, J. Stampfl:
"Generation of ceramic parts via lithography-based AMT";
Vortrag: Materials Science and Engineering 2012, Darmstadt; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 37.

S. Ligon, S. Baudis, F. Nehl, A. Mautner, B. Husar, M. Schwentenwein, A. Wilke, J. Stampfl, G. Russmüller, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: Materials Science and Engineering 2012, Darmstadt; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 62.

S. Ligon, B. Husar, A. Mautner, C. Heller, M. Schwentenwein, A. Wilke, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: MSE 2012 Darmstadt, Darmstadt, Germany; 25.09.2012 - 27.09.2012; in: "MSE 2012 Darmstadt", (2012), S. 380.

A. Ovsianikov, S. Nürnberger, J. Torgersen, Z. Li, H. Redl, R. Liska, J. Stampfl:
"Fabrication of elastic 3D scaffolds by two-photon polymerization";
Vortrag: Materials Science and Engineering 2012, Darmstadt, Deutschland; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 37.

J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska:
"Photo-stimulation of low-toxicity biopolymers in additive manufacturing";
Vortrag: Materials Science and Engineering 2012, Darmstadt, Deutschland; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 22.

M. Kellner, F. Radovanovic, J. Matovic, R. Liska:
"High Performance Proton Conducting Membranes for Fuel Cells made by Photopolymerization of Hydrolytically Stable Monomers";
Vortrag: Physical Chemistry 2012, Belgrade, Serbia; 24.09.2012 - 28.09.2012; in: "Proceedings", (2012), S. 492 - 494.

C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-Initiated Frontal Polymerization for Dental Composites";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).

C. Gorsche, R. Liska, S. Ligon, B. Husar, A. Mautner, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"A new Generation of low toxic Monomers for Additive Manufacturing Technology";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-MRS 2012 Fall Meeting", (2012).

S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, R. Liska:
"Mechanically flexible and controllably degradable electrospun thermoplastic polyurethanes for vascular prostheses";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).

X.H. Qin, Z. Li, S. Ligon, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization";
Poster: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).

N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Biocompatibility evaluation of bioresorbable substitutes";
Poster: ISACB´S Biennal Meeting 2012, London, UK; 12.09.2012 - 15.09.2012; in: "ISACB´S Biennal Meeting 2012 - Programm", (2012), S. 49.

M. Susec, R. Liska, I. Pulko, P. Krajnc:
"Tiol-en klik polimerizacije v makro emulzijah";
Poster: Slovenski kemijski dnevi 2012, Portoroz; 12.09.2012 - 14.09.2012; in: "Slovenski kemijski dnevi 2012", Z. Kravanja, D. Brodnjak-Voncina, M. Bogataj (Hrg.); (2012), ISBN: 978-961-248-353-1.

Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1 (2012), ISSN: 1932-7005; S. 369.

S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Ester based thermoplastic polyurethanes for electrospun vascular prostheses";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 146.

A. Ovsianikov, D. Dado-Rosenfeld, S. Nürnberger, S. Levenberg, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of multi-scale elastic 3D scaffolds";
Vortrag: 3rd TERMIS World Congress, Wien; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine", Wiley, (2012), S. 366.

P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, R. Liska:
"New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 215.

X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 369.

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting fluorinated polymer nanomembrane for fuel cell applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 21.

Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 24.

Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 25.

Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 26.

S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).

R. Liska:
"Thiol-ene polymerization of biocompatible photopolymers";
Hauptvortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino (eingeladen); 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).

X.H. Qin, Z. Li, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 19.

M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Stereolithography with hierarchical polymers based on high internal phase emulsions";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 20.

H. Wutzel, C. Dworak, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Ionic liquids for radical photopolymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 22.

H. Wutzel, J. Kumpfmüller, K. Stadlmann, Z. Li, J. Stampfl, R. Liska:
"Silicon-based waveguides via two-photon induced thiol-ene polymerization";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science", (2012).

H. Wutzel, A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"New monomers based on vinylcarbonates for biomedical applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 23.

M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photopolymerised microcellular polyesters from high internal phase emulsions";
Poster: Iupac Macro 2012, Blacksburg; 24.06.2012 - 29.06.2012; in: "Extended Abstracts", (2012).

M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photostructured Microcellular Polyesters from High Internal Phase Emulsions";
Vortrag: EUPOC 2012 - Porous Polymer­Based Systems: From Design to Application, Gargnano, Italy; 03.06.2012 - 07.06.2012; in: "EUPOC 2012 - Porous Polymer­Based Systems: From Design to Application", (2012), S. 9.

S. Gruber, G. Mitteramskogler, R. Felzmann, P. Tesavibul, R. Liska, J. Stampfl:
"Generative Erzeugung von biokeramischen Bauteilen";
Vortrag: Rapid.Tech 2012, Erfurt; 08.05.2012 - 09.05.2012; in: "Fachmesse und Anwendertagung für Rapid-Technologie", (2012), ISBN: 978-3-932875-34-2; S. 88 (105).

J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, K. Cicha, Z. Li, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments";
Vortrag: Bio-inspired Materials, Potsdam; 20.03.2012 - 23.03.2012; in: "Bio-inspired Materials International School and Conference on Biological Materials Science", DGM Programme, (2012), S. 20.

N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Elastomeric, nanostructured, biodegradable vascular grafts for small-diamter vascular replacement";
Poster: BioNanoMed 2012, Krems; 01.03.2012 - 02.03.2012; in: "BioNanoMed 2012", (2012).

C. Gorsche, A. Mautner, A. Gugg, X.H. Qin, N. Moszner, J. Stampfl, K. Macfelda, G. Russmüller, R. Liska:
"UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization";
Vortrag: 18th Fusion UV Seminar 2012, Osaka, Tokio (eingeladen); 21.02.2012 - 23.02.2012; in: "18th Fusion UV Seminar 2012 - Proceedings", (2012), S. 2-1.

Z. Li, A. Ovsianikov, J. Torgersen, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: International Symposium on NanoPhotonics 2012, Beijing; 12.02.2012 - 14.02.2012; in: "International Symposium on NanoPhotonics 2012", (2012).

M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Preparation of biocompatible porous polymers from multifunctional acrylates";
Vortrag: 1st International Workshop of CoE PoliMat, Ljubljana; 01.12.2011 - 02.12.2011; in: "Contributions to the working session with the international scientific council", (2011), S. 45 - 47.

M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerizable Monomer Formulations for Nanoporous Proton Conducting Membranes";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 242 - 244.

Ph Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric Sol-gel Proton-conducting Membrane";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 230 - 233.

M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Influence of initiator and solvent on porous structure of biocompatible polymers";
Vortrag: 2nd Conference on Applied Biocatalysis and 7th Meeting of Students and University Professors from Maribor and Zagreb, Maribor; 07.11.2011 - 08.11.2011; in: "Book of Abstracts", M. Leitgeb, M. Primozic (Hrg.); (2011).

C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-initiated frontal polymerization with peracrylates";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011).

A. Gugg, H. Wutzel, N. Moszner, R. Liska:
"Controlled photopolymerization by addition fragmentation chain transfer agents";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 134.

B. Husar, M. Schwentenwein, C. Heller, A. Mautner, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 118.

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photopolymerization of crosslinked proton conducting membranes";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 123.

J. Kumpfmüller, K. Stadlmann, V. Satzinger, J. Stampfl, R. Liska:
"Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 124.

Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gescheidt, J. Stampfl, R. Liska:
"Several novel aromatic ketone-based initiators for two-photon polymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 126.

S. Ligon, J. Kumpfmüller, Z. Li, K. Stadlmann, K. Cicha, A. Ovsianikov, A. Ajami, W. Husinsky, A. Rosspeintner, J. Stampfl, R. Liska:
"Real 3D writing by two photon induced polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 78.

A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011).

P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric proton-conducting membrane made by photopolymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 129.

M. Schwentenwein, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Photoelastomers based on thiol-ene polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 90.

S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, G. Weigel, D. Bernhard, R. Liska:
"Assessment of Aliphatic Thermoplastic Polyurethanes for Narrow Diameter Vascular Grafts";
Vortrag: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 645.

R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering";
Vortrag: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 634.

M. Schwentenwein, S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, A. Blümel, W. Grogger, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering";
Poster: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 679.

K. Seidler, S. Ligon, S. Baudis, T. Koch, J. Stampfl, R. Liska:
"Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs";
Poster: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 692.

M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based";
Vortrag: 19th Annual Meeting of the BioEnvironmental Polymer Society (BEPS), Wien; 28.09.2011 - 30.09.2011; in: "19th Annual Meeting of the BioEnvironmental Polymer Society", (2011), ISBN: 978-3-9502992-3-6; S. OP-10.

M. Susec, R. Liska, P. Krajnc:
"Priprava biozdruzljivih poroznih polimerov iz multifunkcionalnih akrilatov = Preparation of biocompatible porous polymers from multifunctional acrylates";
Poster: Slovenski kemijski dnevi 2011, Portoroz; 14.09.2011 - 16.09.2011; in: "Abstracts", (2011).

K. Cicha, Z. Li, A. Mautner, K. Stadlmann, J. Torgersen, N.U Pucher, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: Euromat 2011, Montpellier, France; 12.09.2011 - 15.09.2011; in: "Conference Proceeding Euromat 2011", (2011), S. 0453.

J. Stampfl, G. Mitteramskogler, S. Springer, S. Gruber, A. Ovsianikov, R. Liska:
"Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures";
Vortrag: Euromat 2011, Montpellier; 12.09.2011 - 15.09.2011; in: "Euromat 2011", (2011), Paper-Nr. B33-O21H, 1 S.

A. Wilke, S. Baudis, H. Wilhelm, H. Bergmeister, F. Nehl, R. Liska, J. Stampfl:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: Euromat 2011, Montpellier; 12.09.2011 - 15.09.2011; in: "Euromat 2011 Montpellier", (2011), S. 0264-1-1.

S. Baudis, F. Nehl, S. Ligon, H. Wutzel, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 148.

R. Liska, M. Schwentenwein, S. Baudis, S. Ligon, A. Mautner, A. Gugg, Z. Li, C. Gorsche, N.U Pucher, J. Torgersen, F. Nehl, H. Bergmeister, K. Macfelda, T. Koch, G. Russmüller, J. Stampfl:
"3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies";
Vortrag: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR (eingeladen); 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 101.

H. Wutzel, A. Gugg, N. Moszner, R. Liska:
"Chain transfer reagents for molecular weight control in radical photo-polymerization";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 260.

H. Wutzel, S. Ligon, B. Husar, C. Dworak, H. Hoffmann, R. Liska:
"Comparison of different chemical strategies to overcome oxygen-inhibition in LED-curing of thin films assessed by IR-spectroscopy";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 257.

A. Ovsianikov, F. Nehl, S. Baudis, B. Steyrer, R. Liska, J. Stampfl:
"Microenvironments for the Generation of Bioartificial Tissues";
Vortrag: 24th European Conference on Biomaterials, Dublin; 04.09.2011 - 08.09.2011; in: "24th European Conference on Biomaterials", (2011), S. 97.

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting membranes based on photopolymerizable monomers";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 667.

P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Novel asymmetric interpenetrating proton-conducting membrane";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 642.

T. Koch, F. R. Kogler, R. Potzmann, U. Schubert, S. Krivec, R. Liska, H. Lichtenegger, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Halle-Merseburg; 29.06.2011 - 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen", (2011), 5 S.

J. Kumpfmüller, K. Stadlmann, Z. Li, G. Schmid, J. Stampfl, R. Liska:
"Two-photon-induced microfabrication of flexible optical waveguides";
Vortrag: The 12th International Symposium on Laser Precision Microfabrication, Takamatsu, J; 07.06.2011 - 10.06.2011; in: "Program and Technical Digest (LPM2011)", (2011), S. 104.

M. Schwentenwein, J. Stampfl, C. Heller, F. Varga, G. Russmüller, R. Liska:
"3D-Structuring of Poly(vinyl alcohol)-based Photopolymers";
Vortrag: Termis Eu 2011, Granada, E; 07.06.2011 - 10.06.2011; in: "TERMIS EU 2011 Annual Meeting", (2011).

P. Krajnc, M. Susec, I. Pulko, R. Liska:
"Towards biocompatible and biodegradable polyHIPEs";
Poster: EUPOC 2011, Gargnano; 29.05.2011 - 03.06.2011; in: "Biobased polymers and related biomaterials : abstract booklet", (2011).

J. Stampfl, S. Gruber, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Vortrag: RapidTech 2011, Erfurt; 24.05.2011 - 25.05.2011; in: "Fachmesse und Anwendertagung für Rapid-Technologie", A. Gebhardt (Hrg.); (2011), Paper-Nr. Anwendertagung 5/2, 4 S.

S. Ligon, C. Dworak, S. Baudis, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies";
Poster: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 87 - 88.

S. Ligon, C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerizable biocompatible polymers based on phosphorous containing vinyl esters and vinyl carbamates";
Poster: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 63.

R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology";
Vortrag: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 47.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, C. Heller, R. Liska, J. Stampfl:
"Biocompatible Materials structured in-vivo using high-resolution AMT";
Vortrag: Euro Biomat, Jena; 13.04.2011 - 14.04.2011; in: "Euro Biomat - European Symposium on Biomaterials and Related Areas", 22 (2011), S. 18.

A. Ovsianikov, J. Torgersen, R. Liska, J. Stampfl:
"3D photofabrication by femtosecond laser pulses and its applications in biomedicine";
Vortrag: 4th European Conference on Applications of Femtosecond Lasers in Materials Science FemtoMat & Nano and Photonics, Mauterndorf; 14.03.2011 - 18.03.2011; in: "4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat", (2011), S. 4.

S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"Desing of(Bio)degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Grafts";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 33.

S. Ligon, C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 51.

F. Nehl, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 56 - 57.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Scaffold Fabrication";
Poster: ESAO-ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine", D. Falkenhagen, E. F. Leonard, S. Mikhalovsky (Hrg.); (2011), S. 70.

M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"New Types of Photopolymers for Regenerative Medicine";
Poster: ESAO - ASAIO Winter School 2011, Semmering, A; 26.01.2010 - 29.01.2010; in: "ESAO-ASAIO Winter School", (2011), S. 66.

S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, M. Höfer, R. Liska:
"Benzaldoxime esters as alternative Coinitiators for Radical Photopolymerization";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, S. Jauk, M. Höfer, R. Liska:
"Covalently linked Benzophenone-Amine Photoinitiators with a beta-phenylogous cleavage";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerisation of proton conducting biomimetic membranes";
Poster: European Symposium of Photopolymer Science, Mulhouse, F; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science", (2010).

R. Liska:
"Photopolymerization goes 3D";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France (eingeladen); 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010), S. 13.

A. Mautner, J. Stampfl, R. Liska:
"Influence of various additives onto the rheological and mechanical behavior of photopolymers";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

F. Nehl, S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

X.H. Qin, J. Torgersen, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

L. Zhiquan, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and structure-activity relationship of serveral keton-based two-photon initiators";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).

S. Baudis, C. Grasl, H. Bergmeister, H. Schima, J. Stampfl, R. Liska:
"(Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 7.

S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 6.

C. Heller, X.H. Qin, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska, J. Stampfl:
"3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 3.

B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biomaterials based on low cytotoxicity vinyl esters for bone replacement application";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 57.

R. Liska:
"Photopolymerization in Biomedical Applications";
Vortrag: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien (eingeladen); 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 53.

X.H. Qin, J. Torgersen, L. Zhiquan, A. Ovsianikov, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 56.

G. Russmüller, R. Liska, D. Moser, J. Stampfl, C. Schopper, R. Ewers:
"Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 16.

P. Tesavibul, J. Patzer, R. Felzmann, R. Liska, J. Stampfl:
"Customized ceramic implants made by lithography based additive manufacturing";
Poster: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 25.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In-Vivo-Writing mittels Zweiphotonenlithographie";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband- 4. Wiener Biomaterialsymposium", (2010), S. 24.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Nanostructuring of Biocompatible Materials";
Poster: BioNanoMed 2010, Krems a.d. Donau; 02.11.2010 - 03.11.2010; in: "BioNanoMed 2010", (2010), S. 12.

S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"(bio)degradable Urethane-Elastomers For Electrospun Vascular Grafts";
Poster: XXXVII ESAO Congress, Skopje, R. Macedonia; 08.09.2010 - 11.09.2010; in: "The International Journal of Artificial Organs Vol. 33/No. 7 (2010 July), Abstracts from the XXXVII ESAO Congress", Wichtig Editore, Milano - Birmingham - Osaka (2010), ISSN: 0391-3988; S. 467.

C. Dworak, M. Griesser, G. Gescheidt, R. Liska:
"Oxime esters as potential Coinitiators for Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 196 - 197.

C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Vortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 76 - 77.

A. Gugg, N. Moszner, R. Liska:
"Chain Transfer Reagents in Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 194 - 195.

M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting biomimetic membranes based on sulfonic polymeres";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 120 - 121.

R. Liska:
"3D Photopolymerization";
Hauptvortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben (eingeladen); 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 28.

A. Mautner, J. Stampfl, R. Liska:
"Rheological and mechanical behavior of photopolymers with different additives";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 190.

Z. Li, M. Siklos, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor";
Poster: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 40.

K. Stadlmann, K. Cicha, J. Kumpfmüller, R. Liska, J. Stampfl, U. Hinze, B. Chichkov:
"Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput";
Vortrag: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 32.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, J. Stampfl, R. Liska:
"Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures";
Poster: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 45.

M. Siklos, N.U Pucher, Z. Li, K. Cicha, A. Rosspeintner, A. Ajami, G. Gescheidt, W. Husinsky, J. Stampfl, R. Liska:
"Structure optimization of novel initiators for two-photon polymerization (2PP) process";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Book of Abstracts", (2010).

K. Stadlmann, K. Cicha, J. Kumpfmüller, V. Schmidt, V. Satzinger, R. Liska, J. Stampfl:
"Fabrication of Optical Interconnects with Two Photon Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Proceedings of LPM2010", K. Sugioka (Hrg.); (2010), S. #10-15.

J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Writing using Two-Photon-Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Proceedings of LPM2010", K. Sugioka (Hrg.); (2010), S. #10-42.

S. Baudis, R. Liska:
"Two Approaches for the Development of Materials for Vascular Tissue Regeneration";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 271 - 272.

J. Kumpfmüller, R. Liska:
"Structuring of polysiloxane-based waveguides via two-photon induced polymerization";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 245 - 246.

M. Siklos, Z. Li, N.U Pucher, R. Liska, J. Stampfl:
"New Initiators for Two-Photon Photopolymerisation";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 211 - 212.

C. Heller, M. Schwentenwein, R. Liska, J. Stampfl, F. Varga, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009; in: "E-MRS 2008 spring meeting", (2009).

J. Stampfl, C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska:
"Biophotopolymers for stereolithography and two-photon lithography";
Hauptvortrag: World conference on regenerative medicine, Leipzig (eingeladen); 29.10.2009 - 31.10.2009; in: "Regenerative Medicine", F. Emmrich (Hrg.); Future Medicine, 4 (6) (2009), ISSN: 1746-0751; S. S58 - S59.

S. Baudis, M. Schwentenwein, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration.";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.

C. Dworak, S. Jauk, R. Liska, D. Neshchadin, A. Rosspeintner, G. Gescheidt:
"Photoinitiators with β-phenylogous cleavage";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.

C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Hydroxylamine-based monomers";
Hauptvortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.

C. Dworak, S. Kopeinig, F. Karasu, E. Hummer-Koppendorfer, R. Liska:
"Self-Initiating Monomers based on Acrylamides";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.

C. Dworak, F. Varga, R. Liska:
"Phosphorus-based Monomers for radical polymerization";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.

A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Investigations on Acylsilanes as Photoinitiator for Radical Polymerization";
Poster: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.

A. Gugg, B. Ganster, D. Neshchadin, M. Griesser, C. Hametner, R. Saf, N. Moszner, G. Gescheidt, R. Liska:
"Mechanistic Investigations on Germanium-based Photoinitiators";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 9 S.

C. Heller, M. Schwentenwein, S. Baudis, R. Thaler, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.

C. Heller, M. Schwentenwein, N.U Pucher, K. Stadlmann, T. Koch, F. Varga, J. Stampfl, R. Liska:
"3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Poster: Radtech Europe Conference 2009, Nizza; 14.10.2009 - 15.10.2009; in: "UV/EB- Sustainable Technology", D. Helsby (Hrg.); (2009).

M. Höfer, S. Landertshamer, R. Liska:
"Cationic Photoinitiators based on Phenylethynyl onium salts";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 9 S.

J. Kumpfmüller, N.U Pucher, K. Stadlmann, J. Stampfl, R. Liska:
"Photo-induced Waveguide formation in Polysiloxanes";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.

R. Liska, H. Bergmeister, S. Baudis, C. Dworak, C. Heller, N. Moszner, M. Porodec, N.U Pucher, G. Russmüller, V. Schmidt, M. Schulz-Siegmund, M. Schwentenwein, J. Stampfl, F. Varga, G. Weigel:
"Monomers and Photoinitiators for Biomedical Applications";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.

N.U Pucher, S. Krivec, N. Matsko, N. Galler, T. Koch, V. Satzinger, V. Schmidt, W. Grogger, H. Lichtenegger, R. Liska:
"Photopolymerizable Waveguides in Flexible Sol-Gel Cladding Materials";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.

N.U Pucher, A. Rosspeintner, S. Kontur, A. Ajami, W. Husinsky, G. Gescheidt, J. Stampfl, R. Liska:
"Photochemistry and Photophysics of Two-Photon Initiators";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.

N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.

M. Schwentenwein, C. Heller, J. Stampfl, R. Liska:
"Rapid Prototyping of Biocompatible and Biodegradable monomers";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.

M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.

C. Heller, M. Schwentenwein, M. Porodec, M. Schulz-Siegmund, J. Stampfl, F. Varga, R. Liska:
"Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication";
Vortrag: World Congress on Medical Physics and Biomedical Engineering, München (eingeladen); 07.09.2009 - 12.09.2009; in: "IFMBE Proceedings", O. Dössel, W. Schlegel (Hrg.); 25 (2009), ISBN: 978-3-642-03897-6; 4 S.

A. Gugg, B. Ganster, N. Moszner, R. Liska:
"New Visible Light Photoinitiators for Dental Composites";
Vortrag: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8.

C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D Fabrication of Poly(vinyl alcohol) based monomers";
Vortrag: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8.

J. Kumpfmüller, K. Stadlmann, R. Inführ, N.U Pucher, J. Stampfl, R. Liska:
"Two-Photon-Induced Waveguide Formation In Polysiloxanes";
Poster: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8; S. 14.

A. Rosspeintner, N.U Pucher, M. Griesser, R. Liska, G. Gescheidt:
"Mechanistic Investigation on Novel Two-Photon Absorbing Photoinitiators";
Poster: XXIV International Conference on Photochemistry, Toledo; 19.07.2009 - 24.07.2009; in: "Book of Abstracts", (2009), S. 483.

S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 130.

C. Dworak, S. Jauk, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Liska:
"Radical Photoinitiators with β-phenylogous Cleavage";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 265.

C. Dworak, F. Karasu, R. Liska:
"Self-initiating Monomers";
Vortrag: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 227.

C. Dworak, F. Varga, R. Liska:
"Photopolymerization of Biocompatible Phosphorus-based Monomers";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 130.

R. Liska, N.U Pucher, C. Heller, M. Schwentenwein, R. Inführ, V. Satzinger, G. Gescheidt, V. Schmidt, F. Varga, J. Stampfl:
"Materials for Stereolithography of Optical and Medical Devices";
Vortrag: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 192.

M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers with different polymerizable groups";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 208.

J. Stampfl, C. Heller, M. Schwentenwein, F. Varga, R. Liska:
"Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication";
Vortrag: European Polymer Congress 2009, Graz; 12.07.2009 - 17.07.2009; in: "Book of Abstracts", F. Stelzer (Hrg.); (2009), S. 208.

C. Heller, M. Schwentenwein, F. Varga, R. Liska, J. Stampfl:
"Biocompatible and biodegradable photopolymers for microstereolithography";
Vortrag: 5th International Congress on Laser Advanced Materials Processing, Kyoto (eingeladen); 29.06.2009 - 02.07.2009; in: "Proceedings of LAMP2009", I. Miyamoto (Hrg.); Japan Laser Processing Society, Osaka (2009), Paper-Nr. #09-092, 5 S.

J. Stampfl, C. Heller, M. Schwentenwein, S. Baudis, F. Varga, R. Liska:
"Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung";
Vortrag: 12. Problemseminar Deformation und Bruch, Merseburg; 24.06.2009 - 26.06.2009; in: "Tagungsband Deformation und Bruch", W. Grellmann (Hrg.); (2009), 4 S.

J. Stampfl, R. Inführ, K. Stadlmann, N.U Pucher, H. Lichtenegger, V. Schmidt, R. Liska:
"Materials for the fabrication of optical waveguides with two photon photopolymerization";
Vortrag: Fifth International WLT Conference on Lasers in Manufacturing, München (eingeladen); 15.06.2009 - 18.06.2009; in: "Lasers in Manufacturing 2009", A. Ostendorf (Hrg.); AT Fachverlag GmbH, Stuttgart (2009), S. P1 - P4.

R. Inführ, J. Stampfl, S. Krivec, R. Liska, H. Lichtenegger, V. Satzinger, V. Schmidt, N. Matsko, W. Grogger:
"3D-structuring of optical waveguides with two photon polymerization";
Vortrag: 2009 MRS Spring Meeting, San Francisco, USA; 14.04.2009 - 17.04.2009; in: "Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography", S. Kuebler, V. Milam (Hrg.); 1179E (2009), Paper-Nr. 1179-BB01-07, 7 S.

R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, N. Galler, K. Stadlmann, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography";
Poster: Viennano'09 - 3rd Vienna International Conference Nano-Technology, Vienna; 18.03.2009 - 20.03.2009; in: "Nano-Technology", W.J. Bartz (Hrg.); (2009), ISBN: 978-3-901657-32-0; S. 503 - 508.

S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Photoelastomere als biokompatible Blutgefäßersatzmaterialien";
Poster: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), S. 41.

C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering";
Vortrag: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), ISBN: 978-3-200-01613-2; S. 3.

M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Surface Immobilization of model protein onto new photo cross-linkable materials";
Poster: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), ISBN: 978-3-200-01613-2; S. 60.

C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"New Materials for 3D-Scaffolds for Tissue Engineering Applications";
Vortrag: TERMIS-EU 2008 Meeting, Porto, P; 22.06.2008 - 28.06.2008; in: "Abstracts from TERMIS-EU 2008 Meeting", Tissue Engineering, Part A, Vol. 14 / No. 5 (2008), ISSN: 1937-3341; S. 761.

S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

R. Liska, C. Heller, S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, M. Schulz, J. Stampfl, F. Varga:
"Biocompatible and biodegradable Photopolymers for Rapid Prototyping";
Vortrag: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker:
"Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

N.U Pucher, S. Baudis, C. Heller, M. Schuster, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

M. Schuster, C. Turecek, F. Varga, G. Weigel, J. Stampfl, R. Inführ, C. Heller, S. Baudis, R. Liska:
"Fundamental investigations towards a new bone replacement material containing gelatin photopolymers";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

C. Slugovc, M. Sandholzer, M. Schuster, F. Varga, R. Liska:
"A Romp-based photoinitiator-coinitiator system with improved migration stability";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).

J. Stampfl, C. Heller, M. Schuster, S. Baudis, J. Homa, R. Liska:
"Biofunktionelle Photopolymere für die generative Fertigung";
Vortrag: Rapidtech, Erfurt/Deutschland; 27.05.2008 - 28.05.2008; in: "Tagungsband", (2008), Paper-Nr. AT-Session5-V2, 4 S.

R. Liska, M. Schuster, C. Heller, S. Baudis, N.U Pucher, C. Turecek, V. Schmidt, H. Bergmeister, J. Stampfl, F. Varga, G. Weigel:
"New concepts of biocompatible and biodegradable photopolymers";
Vortrag: European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES", Berlin, D (eingeladen); 10.04.2008 - 11.04.2008; in: "European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES" Proceedings", (2008), S. 117 - 127.

V. Satzinger, V. Schmidt, L. Kuna, R. Inführ, R. Liska, J. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: SPIE Photonics Europe 2008, Strasbourg, F; 07.04.2008 - 11.04.2008; in: "Proceedings of SPIE", (2008).

V. Satzinger, V. Schmidt, L. Kuna, C. Palfinger, R. Inführ, R. Liska, J. R. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: Photonics Europe 2008 (SPIE), Strasbourg, Frankreich; 07.04.2008 - 10.04.2008; in: "Proc. of SPIE Vol. 6992", (2008), S. 699217-1 - 699217-10.

S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 61.

C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating Monomers based on Di- and Trifunctional Acrylates";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 76.

G. Gescheidt, D. Neshchadin, M. Griesser, R. Liska:
"Insights Into Early Stages of Radical Polymerization by NMR The CIDNP Effect as a Mechanistic Tool";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 29.

A. Gugg, B. Ganster, U. Fischer, N. Moszner, R. Liska:
"Acylgermanium Derivatives as New Visible Light Photoinitiators for Dental Materials";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 99.

C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 10.

M. Höfer, R. Liska:
"Red-shifted Cationic Photoinitiators with selective Cleavage Mechanism";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 74.

F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-Cyclodextrin/ Methyl Methacrylate Host / Guest complex in the Presence of Water Soluble Photoinitiator";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 103.

F. Karasu, C. Dworak, S. Kopeinig, E. Hummer-Koppendorfer, N. Arsu, R. Liska:
"Photoinitiating Monomers based on Diacrylamides";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 107.

S. Krivec, R. Liska, H. Lichtenegger:
"Sol-Gel Materials as Carrier for Polymeric Waveguides";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 83.

N.U Pucher, R. Inführ, S. Bashir, V. Satzinger, V. Schmidt, W. Husinsky, H. Lichtenegger, J. Stampfl, R. Liska:
"Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 11.

M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, C. Slugovc:
"ROMP Based Macroinitiator-Coinitiator Systems With Improved Migration Stability";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 106.

S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 6 S.

B. Ganster, U. Fischer, V. Rheinberger, N. Moszner, R. Liska:
"New visible light PIs for Dental Materials";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 8 S.

B. Ganster, G. Ullrich, U. Salz, N. Moszner, R. Liska:
"Water-Soluble Bisacylphosphin oxides for the Photopolymerization of acidic aqueous Dental Formulations";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

M. Höfer, C. Heller, R. Liska:
"New Sulfonium Salt based Photoinitiators for Cationic Photopolymerization";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

M. Höfer, N. Moszner, R. Liska:
"Singlet Oxygen Reactive Components for Radiation Curable Formulations";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, V. Schmidt, V. Satzinger, L. Kuna, A. Haase, J. Stampfl, R. Liska:
"Refractive Index Patterning of Polymeric Waveguide Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 7 S.

S. Jauk, R. Liska:
"New Derivatives of Covalently linked Benzophenone-Amine based Photoinitiato";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"New Monomers for radiation curable formulations";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"Photopolymerization of Silicone Acrylamides and Acrylates";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

R. Liska, B. Ganster, M. Höfer, C. Heller, S. Kopeinig, E. Hummer-Koppendorfer, N. Moszner:
"Photoinitiators with bathochromic shift";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

N. Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Two Photon Initiated Polymerization by Inones";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 7 S.

M. Schuster, M. Sandholzer, C. Turecek, F. Varga, C. Slugovc, R. Liska:
"Synthesis and Evaluation of Eosin-based Photoinitiators with Improved Migration Stability";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.

M. Schuster, C. Turecek, C. Heller, F. Varga, J. Stampfl, R. Liska:
"3D-Structuring of Gelatine based Photopolymers";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 6 S.

J. Stampfl, M. Schuster, S. Baudis, H. Lichtenegger, R. Liska, C. Turecek, F. Varga:
"Biodegradable stereolithography resins with defined mechanical properties";
Vortrag: 3rd International conference on virtual and rapid prototyping (VRAP), Leiria, Portugal; 24.09.2007 - 29.09.2007; in: "Virtual and Rapid Manufacturing", P. Bartolo (Hrg.); Taylor and Francis, (2007), ISBN: 978-0-415-41602-3; S. 283 - 288.

S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, J. Stampfl, F. Varga, R. Liska:
"Development of flexible biocompatible photopolymers as artificial vascular replacement materials";
Vortrag: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 705.

M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biophotopolymers for hard tissue replacement";
Poster: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 705.

C. Turecek, M. Schuster, S. Baudis, R. Liska, J. Stampfl, F. Varga:
"Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping";
Poster: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 723.

M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Vortrag: 234th ACS National Meeting, Boston, USA; 19.08.2007 - 23.08.2007; in: "Abstracts of Papers", (2007), 2 S.

J. Stampfl, M. Schuster, C. Heller, R. Liska, C. Turecek, F. Varga:
"Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg, Deutschland; 20.06.2007 - 22.06.2007; in: "Tagungsband", (2007), 6 S.

M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biofunctional Photopolymers for Micro-Stereolithography";
Vortrag: 8th International Symposium on Laser Precision Microfabrication, LPM 2007, Vienna, A; 24.04.2007 - 28.04.2007; in: "Proceedings of LPM2007", (2007), Paper-Nr. 07-72, 5 S.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften";
Vortrag: 2. Wiener Biomaterialsymposium, TU Wien; 22.11.2006 - 24.11.2006; in: "2. Wiener Biomaterialsysmposium", (2006), 9 S.

M. Schuster, R. Liska, F. Varga, C. Turecek:
"Gelatin-based Biophotopolymers";
Vortrag: 2. Wiener Biomaterialsymposium, Wien, Österreich; 22.11.2006 - 24.11.2006; in: "2. Wiener Biomaterialsymposium - CD", (2006), 7 S.

M. Schuster, C. Turecek, A. Mateos, J. Stampfl, F. Varga, R. Liska:
"Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes";
Poster: 2nd Stipomat Workshop, Seggau, Austria; 23.10.2006 - 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts", (2006), S. P17.

M. Schuster, C. Turecek, T. Verdianz, J. Stampfl, F. Varga, R. Liska:
"Development of Biodegradable Photopolymers";
Poster: 2nd Stipomat Workshop, Seggau, Austria; 23.10.2006 - 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts", (2006), S. P16.

Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties";
Vortrag: Polymerwerkstoffe 2006, Halle/Saale, Deutschland; 27.09.2006 - 29.09.2006; in: "Polymerwerkstoffe 2006 - Abstracts", (2006), ISBN: 3-86010-856-5; S. 34.

J. Stampfl, R. Inführ, B. Seidl, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Two-Photon-3D-lithography of Functional Polymers";
Vortrag: Polymerwerkstoffe 2006, Halle/Saale, Deutschland; 27.09.2006 - 29.09.2006; in: "Polymerwerkstoffe 2006 -Abstracts", (2006), ISBN: 3-86010-856-5; S. 36.

B. Ganster, G. Ullrich, N. Moszner, U. Salz, R. Liska:
"Hydrophilic photoinitiators for acidic aqueous dental formulations";
Vortrag: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006).

C. Heller, N.U Pucher, B. Seidl, R. Liska:
"New cross-conjugated photoinitiators";
Poster: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006), S. 32.

N. Pucher, C. Heller, B. Seidl, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New Initiators for Two-Photon Photopolymerization";
Poster: 8th Austrian Polymer Meeting, Linz; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application", (2006).

M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Biodegradable photopolymers for bone tissue engeneering";
Vortrag: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006).

Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Nonostructured silica/polymer-monoliths";
Poster: ISOSXIV 3rd European Organosilicon Days, Würzburg, Deutschland; 31.07.2006 - 02.08.2006; in: "ISOSXIV 3rd European Organosilicon Days - Abstracts", (2006), S. P071.

R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm";
Poster: Junior Scientist Conference 2006, Wien; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006. Proceedings", (2006), ISBN: 3-902463-05-8; S. 131 - 132.

M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Junior Scientist Conference, Wien; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings", (2006), ISBN: 3-902463-05-8; S. 173 - 174.

J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium, Lech am Arlberg; 19.04.2006 - 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft", (2006), S. #.

R. Inführ, R. Liska, H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", Radtech Europe Association, (2005), ISBN: 3-87870-330-9; S. 487 - 492.

M. Schuster, S. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", (2005), S. 365 - 372.

M. Schuster, S. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", (2005), S. 479 - 486.

R. Inführ, H. Lichtenegger, J. Stampfl, R. Liska, C. Fritscher, N. Hüsing:
"3D Microstereolithography of soluble mold materials";
Vortrag: 31st International Conference on Micro- and Nano-Engineering 2005, Vienna; 19.09.2005 - 22.09.2005; in: "31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts", (2005), S. 9D_04.

R. Inführ, C. Fritscher, R. Liska, H. Lichtenegger, J. Stampfl, N. Hüsing:
"Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials";
Poster: Euromat 2005, Prag; 05.09.2005 - 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes", http://www.dgm.de/past/2005/euromat2005/programme/ (2005), Paper-Nr. P618, 1 S.

M. Schuster, C. Turecek, M. Rumpler, F. Varga, R. Liska, J. Stampfl:
"Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: EuroMat 2005, Prag, Tschechien; 05.09.2005 - 06.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org", (2005), 1 S.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"NANOSTRUCTURED SILICA/POLYMER-MONOLITHS";
Poster: ISOS XIV, 14th International Symposium on Organosilicon Chemistry; 3rd European Organosilicon Days, Würzburg, Germany; 31.07.2005 - 05.08.2005; in: "ISOS XIV, 14th International Symposium on Organosilicon Chemistry", (2005), S. 158.

R. Inführ, H. Lichtenegger, C. Fritscher, J. Stampfl, R. Liska:
"3D Lithography of organo-soluble mold materials";
Poster: 7th Austrian Polymer Meeting, Graz, Austria; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 67.

S. Jauk, G. Ullrich, P. Burtscher, N. Moszner, R. Liska:
"New Concepts for Type II Photoinitiators";
Vortrag: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 41.

S. Kopeinig, R. Liska:
"Benzophenone as covalently bound sensitizer for α-cleavable Photoinitiatiators";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 70.

R. Liska, K. Kalinyaprak-Icten, B. Seidl:
"New insights into the photochemistry of cross-conjugates photoinitiators";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 71.

R. Liska, M. Schuster, R. Inführ, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for Rapid Prototyping of cellular Biomaterials";
Vortrag: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 40.

M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Acrylamide-based Biophotopolymers for Bone Tissue Engineering";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 69.

L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
Vortrag: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. o.1.3.1 Ref.1946, 3 S.

T. Verdianz, M. Schuster, M. Rumpler, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for rapid prototyping of cellular bone replacement materials";
Poster: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. P4.4.18 Ref.2290, 2 S.

T. Verdianz, H. Simbürger, H. Gruber, R. Liska:
"Surface modification of polyimides with co-reactive and catalytic groups";
Poster: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. P1.2-60 Ref.2295, 2 S.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska:
"TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS";
Poster: E-MRS 2005 Spring Meeting, Strasbourg, France; 31.05.2005 - 03.06.2005; in: "E-MRS 2005 Spring Meeting", (2005), S. I - 28/54.

Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, S. Seidler:
"Templating of organic/inorganic hybrid materials";
Poster: EMRS Spring Meeting 2005, Strasbourg, France; 31.05.2005 - 03.06.2005; in: "European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme", (2005), S. I -28/54.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Hauptvortrag: MRS Fall Meeting 2004, Boston (USA); 29.11.2004 - 03.12.2004; in: "2004 MRS Fall Meeting", MRS, http://lucy.mrs.org/meetings/fall2004/abstracts/f04_abstract_ee.pdf (2004), Paper-Nr. EE 9.15, 1 S.

Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Poster: MRS Fall Meeting, Boston, USA; 29.11.2004 - 03.12.2004; in: "MRS Fall Meeting 2004 - Program & Exhibit Guide", (2004), S. 729.

R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for Rapid Prototyping of cellular structures";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-327.

R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one, a new and highly efficient Photoinitiator";
Vortrag: 228th ACS National Meeting, Philadelphia, USA (eingeladen); 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-284.

R. Liska, B. Seidl, G. Grabner:
"Laser Flash Photolysis investigations of pyridine ketones";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-326.

R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-323.

H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"3D-Templating of hierarchical ceramics";
Vortrag: MRS Spring Meeting 2004, San Francisco, USA; 12.04.2004 - 16.04.2004; in: "MRS Spring Meeting 2004, Abstracts", MRS, (2004), S. 368.

A. Liska, H. Wölfle, R. Liska, S. Knaus:
"Photopolymerization of Maleimide-1,3-Diketones";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 939 - 944.

R. Liska:
"Dramatic Enhancement in Sensitizers Effects for Free Radical Photoinitiators";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 947 - 952.

R. Liska, F. Schwager, H. Gruber, A. Wöß, A. Pisaipan, J. Stampfl, S. Seidler:
"A new Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 195 - 201.

B. Seidl, D. Herzog, G. Grabner, R. Liska:
"A Cleavable Photoinitiators with Reduced Oxygen Sensitivity";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 1011 - 1016.

B. Seidl, R. Liska:
"New Coinitiator-free Benzophenone Derived Photoinitiator";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 1001 - 1007.

J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl:
"Rapid Prototyping - A Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: 1st International Conference on Advanced Reserch in Virtual and Rapid Prototyping, Leira (Portugal), Leira (Portugal); 01.10.2003 - 04.10.2003; in: "1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira (Portugal)", Leira (Portugal) (2003), ISBN: 972-99023-0-5; S. 659 - 666.

R. Liska, N. Fuß, D. Herzog, B. Seidl, G. Grabner:
"New chromophores for photoinitiators";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 90.

B. Seidl, R. Liska, H. Gruber:
"Benzophenone based Ynones as photoinitiators";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 125.

B. Seidl, R. Liska, H. Gruber, G. Grabner:
"Laser flash photolysis of pyridine ketones";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 126.

J. Stampfl, A. Wöß, S. Seidler, F. Schwager, R. Liska, H. Gruber:
"Water soluble photocurable resins for rapid prototyping applications";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 70.

G. Ullrich, D. Herzog, R. Liska, H. Gruber, P. Burtscher, N. Moszner:
"Synthesis and photoactivity of new camphorquinone derivatives";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 131.

T. Verdianz, R. Liska, H. Gruber, H. Simburger:
"Surface modification of polyimides for electric motor manufacture";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 165.

B. Seidl, D. Herzog, G. Grabner, R. Liska:
"Photochemistry and photophysics of heterocyclic ketones";
Poster: 10th Blue Danube Symposium on Heterocyclic Chemistry, Vienna, Austria; 03.09.2003 - 06.09.2003; in: "10th Blue Danube Symposium on Heterocyclic Chemistry", (2003), ISBN: 80-227-1938-2; S. PO-163.

K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polypropylene";
Vortrag: 10th"Tihany" Symposium on Radiation Chemistry, Sopron, Hungary; 31.08.2002 - 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts", (2002).

R. Liska, K. Lisak, B. Seidl, N. Fuß:
"Hydroxyalkylphenone Based Ynones as New alpha-Cleavable Photoinitiators in Free Radical Polymerization";
Poster: 10th"Tihany" Symposium on Radiation Chemistry, Sopron, Hungary; 31.08.2002 - 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts", (2002).

K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polyfines";
Poster: XIXth IUPAC Symposium on Photochemistry, Budapest, Hungary; 14.07.2002 - 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts", (2002), ISBN: 9639319228; S. 311.

R. Liska, D. Herzog, B. Seidl, N. Fuß:
"New Chromophors for alpha-Cleavage Photoinitiators in Free Radical Polymerization";
Poster: XIXth IUPAC Symposium on Photochemistry, Budapest, Hungary; 14.07.2002 - 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts", (2002), ISBN: 9639319228; S. 312 - 313.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


M. Lunzer, D. Ossipov, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien; 09.11.2017 - 10.11.2017.

D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser Based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien; 09.11.2017 - 10.11.2017.

W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Spectral optimization of multiphoton polymerisation for tissue engineering";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien; 09.11.2017 - 10.11.2017.

E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering";
Vortrag: Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017, Wien (eingeladen); 09.11.2017 - 10.11.2017.

W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Poster: AMBA 2017, Ghent; 28.09.2017.

G. Harakaly, M. Kury, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for formation of tough photopolymer network in 3D printing applications";
Poster: Workshop Additive manufacturing as a tool to create life in 3D, Brno; 26.07.2017 - 27.07.2017.

S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Synthesis and Characterization of Polymer Linker Systems for T-cell Investigations";
Poster: Workshop Additive manufacturing as a tool to create life in 3D, Brno; 26.07.2017 - 27.07.2017.

M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitised Two-Photon Cleavage";
Poster: Workshop Additive manufacturing as a tool to create life in 3D, Brno; 26.07.2017 - 27.07.2017.

E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid";
Poster: Workshop Additive manufacturing as a tool to create life in 3D, Brno; 26.07.2017 - 27.07.2017.

R. Liska:
"Smart Photopolymers: from 3D printing to biomaterials";
Vortrag: Seminar Series 2017, CEITEC Brünn (eingeladen); 21.06.2017.

J. Kollmer, D. Grunenberg, C. Gorsche, R. Liska, J. Stampfl:
"Lithographiebasierte GF für die Prozessierung hochviskoser Photopolymere";
Poster: Internationale Messe & Konferenz für additive Technologien, Erfurt; 05.06.2017 - 07.06.2017.

D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. Van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser-Based 3d Printing Of Hydrogel Barrier Models For Microfluidic Applications";
Poster: Biofabrication for Hierarchical in vitro Tissue Models, Herstein; 05.06.2017 - 09.06.2017.

J. Kollmer, P. Dorfinger, C. Gorsche, R. Liska, J. Stampfl:
"Toughening and coloring of photopolymers for lithography-based 3D-printing";
Vortrag: 6th International Conference on Additive Technologies iCAT 2016, Nürnberg; 29.11.2016 - 30.11.2016.

B. Steyrer, C. Gorsche, P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Lithography-based Additive Manufacturing";
Vortrag: MSE 2016, Darmstadt; 26.09.2016 - 29.09.2016.

R. Liska:
"Advanced Applications of Photopolymerization in the Field of Biomaterials and 3D Printing";
Vortrag: GÖCH Öberösterreich (eingeladen), Johannes Kepler Universität Linz; 10.05.2016.

S. Baudis, Z. Tomasikova, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors";
Poster: International Conference on Biofabrication 2015, Domplein 29, 3512 JE Utrecht; 07.11.2015 - 09.11.2015.

S. Benedikt, K. Dietliker, H. Grützmacher, M. Markovic, N. Moszner, A. Ovsianikov, R. Liska:
"Characterization and Comparison of Next Generation Water-Soluble Photoinitiators";
Poster: International Conference on Biofabrication 2015, Utrecht, Netherlands; 07.11.2015 - 09.11.2015.

P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Stereolithography (SL)";
Vortrag: Polymer Processing Society Conference 2015, Graz; 21.09.2015 - 25.09.2015.

R. Gmeiner, B. Steyrer, A. Samusjew, A. Mautner, R. Liska, J. Stampfl:
"Stereolithographic Manufacturing of Biodegradable Photopolymers";
Poster: Polymer Processing Society Conference 2015, Graz; 21.09.2015 - 25.09.2015.

S. Baudis, R. Liska:
"Advanced Photopolymers for High Resolution Addtive Manufacturing";
Vortrag: ADD+IT 2015, Linz (eingeladen); 10.09.2015 - 11.09.2015.

R. Liska:
"Advanced Photopolymers for Tissue Engineering";
Hauptvortrag: SummerSchool 2015, Bad Herrenalb (eingeladen); 22.06.2015 - 24.06.2015.

C. Gorsche, M. Griesser, T. Koch, N. Moszner, R. Liska:
"The potential of β-allyl sulfone-based dimethacrylate networks";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), Lacanau, Lacanau; 26.05.2015 - 29.05.2015.

R. Liska:
"Biocompatible Photopolymers for 3D printing";
Hauptvortrag: GDCh Vortrag Hochschule Niederrhein, Niederrhein; 23.04.2015.

R. Liska:
"3D Printing of a New Generation of Biocompatible and Biodegradable Photopolymers";
Vortrag: Makromolekulares Kolloquium, Freiburg (eingeladen); 25.02.2015 - 27.02.2015.

R. Liska:
"Fundamentals of Frontal (Photo)polymerization";
Vortrag: PolyComp Annual Meeting 2014, Leoben (eingeladen); 19.11.2014.

R. Liska:
"Biokompatible Polymere für den 3D‐Druck";
Vortrag: 8. Forschungs‐ & Technologieforum Mostviertel, Amstetten (eingeladen); 23.09.2014.

R. Liska:
"Photopolymers in digital and restorative dentistry";
Vortrag: Christian Doppler Forum, Bad Blumau (eingeladen); 17.09.2014 - 19.09.2014.

R. Liska:
"Biocompatible polymers in tissue engineering";
Vortrag: Seminar-SoftMatterScience, Freiburg (eingeladen); 13.05.2014.

C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New generation of highly efficient long-wavelength photoinitiators for dental restoratives: From research to application";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"Experimental Comparison of Various Anti-Oxygen Inhibition Strategies in LED Curing";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

B. Husar, A. Mautner, F. Varga, J. Stampfl, R. Liska:
"An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

S. Ligon, X.H. Qin, P. Esfandiari, Z. Tomasikova, P. Gruber, A. Ovsianikov, R. Liska:
"Advanced Applications of Thiol-Ene Formulations";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

S. Ligon, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"New Developments in Initiators for Two-Photon Polymerization";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: Steinhofer-Vorlesung, Freiburg (eingeladen); 12.05.2014.

P. Sehnal, K. Harper, A. Rose, D. Anderson, A. Green, B. Husar, M. Griesser, R. Liska:
"Novel Phosphine Oxide Photoinitiators";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.

R. Liska:
"Biofunctional Photopolymers";
Vortrag: 1. Meeting des erweiterten Clusters für Geweberegeneration 2014, Vienna; 13.03.2014.

D. Bomze, V. Schwarz, B. Husar, X.H. Qin, P. Gruber, A. Ovsianikov, J. Stampfl, R. Liska:
"Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking";
Poster: P2M Winter School, Zakopane; 13.01.2014 - 17.01.2014.

R. Liska:
"Rapid Prototyping von biokompatiblen und bioabbaubaren Kunststoffen für die Geweberegeneration";
Vortrag: VSVA-Symposium, Wien (eingeladen); 11.11.2013.

R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: 27. Internationales H.F. Mark-Symposium 2013, Wien (eingeladen); 07.11.2013.

R. Liska:
"Two Photon induced Polymerization: An excellent tool for precise sub- micrometer fabrication of biocompatible photopolymers";
Vortrag: Summer school P2M, Ghent (eingeladen); 25.08.2013 - 28.08.2013.

R. Liska:
"Photopolymerization and 3D printing";
Vortrag: Slovak Academy of Sciences, Bratislava (eingeladen); 20.06.2013.

S. Ligon, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Moszner, R. Liska:
"Advances in long wavelength initiators for photocurable dental adhesives and restoratives";
Poster: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013.

X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, H. Redl, W. Holnthoner, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-photon polymerization for biodegradable 3D hydrogels scaffolds";
Poster: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013.

A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of cell-containing hydrogel constructs";
Vortrag: International Conference on Biofabrication, Manchester; 29.10.2012 - 31.10.2012.

J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds";
Hauptvortrag: CAIM III Tercier Congreso Argentino die Engereía Mécanica, Buenos Aires (eingeladen); 02.10.2012 - 05.10.2012.

A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for controlled radical photopolymerization";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.

B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.

S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Electrospun thermoplastic polyurethane vascular grafts with controllable degradation";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.

R. Liska:
"Photopolymerization and 3D lithography";
Vortrag: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols (eingeladen); 24.09.2012 - 28.09.2012.

B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012.

S. Ligon, B. Husar, S. Baudis, F. Nehl, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012.

R. Liska:
"Biocompatible Photopolymers: From Synthesis to in Vivo Studies";
Vortrag: University of Maribor, Maribor (eingeladen); 31.08.2012.

R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: BASF, Ludwigshafen, D (eingeladen); 07.08.2012.

J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, L. Zhiquan, V. Mironov, R. Liska:
"Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation";
Poster: 2012 MRS Spring Meeting & Exhibit, San Francisco; 09.04.2012 - 13.04.2012.

R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: Cytec, Brüssel (eingeladen); 12.02.2012.

R. Liska:
"Advanced Monomers and Initiators for radical Photopolymerization";
Vortrag: Institut für Oberflächenmodifizierung, Leipzig (eingeladen); 26.01.2012.

R. Liska:
"New Concepts in Radical Photopolymerization";
Vortrag: BASF, Ludwigshafen, D (eingeladen); 15.12.2011.

C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska:
"In-vivo evaluation of new synthetic degradable and non-degradable small diameter vascular grafts";
Vortrag: Vfwf-Universitätsvorlesung, Vienna (eingeladen); 02.12.2011.

R. Liska:
"Advanced Biomaterials for 3D-Photopolymerization";
Vortrag: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.

A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates, a new generation of low toxic monomers";
Poster: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.

K. Seidler, S. Baudis, S. Ligon, C. Grasl, M. Arras, H. Schima, H. Bergmeister, B. Winter, T. Koch, J. Stampfl, R. Liska:
"Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts";
Poster: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.

R. Liska:
"Photopolymerization goes 3D";
Vortrag: FoE Advanced Material Science, Graz; 27.10.2011.

K. Cicha, Z. Li, K. Stadlmann, J. Torgersen, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: 16. Tagung Festkörperanalytik, Wien; 04.07.2011 - 06.07.2011.

R. Liska:
"New Monomers and Photoinitiators";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.

R. Liska:
"Photopolymers and Rapid Prototyping";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.

R. Liska:
"Photopolymers for biomedical applications";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.

R. Liska:
"Fundamentals in Photopolymerization";
Vortrag: Firma Objet, Rehovot, IL (eingeladen); 07.04.2011 - 08.04.2011.

J. Kumpfmüller, R. Inführ, K. Stadlmann, K. Cicha, V. Satzinger, J. Stampfl, R. Liska:
"Flexible Optical WaveGuides via Two-Photon Polymerization";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.

Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.

X.H. Qin, C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"New Bio-photopolymers with good biocompatibility for Tissue Engineering";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.

M. Schwentenwein, C. Heller, X.H. Qin, F. Varga, J. Stampfl, R. Liska:
"Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers";
Vortrag: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.

R. Liska:
"Photopolymerisation of Biocompatible Materials";
Vortrag: Firma Beiersdorf, Hamburg, D (eingeladen); 15.04.2010.

R. Liska:
"Biocompatible Photopolymers";
Vortrag: Firma Objet, Rehovot, IL; 07.04.2010.

R. Liska:
"Further Projects in the field of Photopolymerization";
Vortrag: Firma Objet, Rehovot, IL; 07.04.2010.

R. Liska:
"New Monomers and Initiators for Photopolymerisation";
Vortrag: Firma Durst, Lienz in Osttirol, A (eingeladen); 05.02.2010.

S. Baudis, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.

A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Dental Composite Materials Based on Visible Light Photopolymerization.";
Poster: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.

C. Heller, C. Dworak, R. Liska, F. Varga:
"Biocompatible Phorphorus-based Monomers for Radical Polymerization";
Poster: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.

C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, R. Liska, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers.";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.

R. Liska:
"Recent Advances in Photopolymerisation";
Vortrag: Firma Huntsman, Basel, CH (eingeladen); 26.11.2009.

R. Liska:
"Robert Liska, Photoinitiators and Monomers for Medical Applications";
Vortrag: Photopolymerization Fundamentals 2009, Breckenridge, CO, USA (eingeladen); 21.06.2009 - 24.06.2009.

S. Gäbler, T. Koch, J. Stampfl, S. Seidler, C. Heller, S. Baudis, R. Liska, R. Weidisch:
"Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA)";
Poster: Materials Science and Engineering - MSE 2008, Nürnberg; 01.09.2008 - 04.09.2008.

R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization";
Poster: Materials Science and Engineering - MSE 2008, Nürnberg; 01.09.2008 - 04.09.2008.

M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein";
Poster: International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers, Stockholm/ Schweden; 01.06.2008 - 04.06.2008.

R. Liska:
"Photopolymerisation mittels Ein- und Zwei Photonen";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel (eingeladen); 12.07.2007 - 13.07.2007.

R. Inführ, N.U Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: EMRS Spring Meeting 2007, Strasbourg, France; 28.05.2007 - 01.06.2007.

R. Inführ, J. Stampfl, N. Pucher, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: E-MRS European Materials Research Society - Spring Meeting 2007, Strasbourg/ France; 28.05.2007 - 01.06.2007.

M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Vortrag: EMRS Spring Meeting 2007, Strasbourg, France; 28.05.2007 - 01.06.2007.

R. Liska:
"Photopolymere - Neue Dentalmaterialien und bioresorbierbarer Knochenersatz";
Vortrag: Informationsveranstaltung: Innovationen für die Medizintechnik, Tu-Wien, A (eingeladen); 18.04.2007.

R. Liska, M. Schuster, R. Inführ, C. Turecek, N.U Pucher, C. Heller, B. Seidl, C. Fritscher, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, F. Varga, J. Stampfl:
"Single- and Two-Photon Initiated Polymerization in Rapid Prototyping";
Vortrag: 2007 MRS Spring Meeting, San Francisco, USA (eingeladen); 09.04.2007 - 13.04.2007.

N.U Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New alkyne-based initiators for single- ad two-photon-induced photopolymerization";
Poster: 2007 MRS Spring Meeting, San Francisco; 09.04.2007 - 13.04.2007.

M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Development of bone replacement materials using stereolithography";
Poster: MRS Spring Meeting, an Francisco; 09.04.2007 - 13.04.2007.

R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat 2006, Lausanne, Switzerland; 04.09.2006 - 06.09.2006.

R. Inführ, Ch. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat, Lausanne, Switzerland; 04.09.2006 - 08.09.2006.

R. Liska, N.U Pucher:
"Materials for Two Photon Absorption Photopolymerization";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel; 06.07.2006 - 08.07.2006.

C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts";
Poster: 33rd European Symposium on Calcified Tissues, Prag; 10.05.2006 - 14.05.2006.

M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Vortrag: Junior Scientist Conference, Wien; 19.04.2006 - 21.04.2006.

R. Liska:
"Recent developments in photoinitiators and photopolymerization";
Vortrag: Universität Mulhouse, F-68093 Mulhouse (eingeladen); 22.03.2006.

R. Liska:
"Konzepte und Modifikationen in Typ I und Typ II Photoinitiatoren";
Vortrag: CIBA, Basel (eingeladen); 21.03.2006.

R. Liska:
"Photoinitiatoren mit funktionellen Gruppen";
Vortrag: EMS Chemie, CH-7013 Domat/Ems (eingeladen); 20.03.2006.

R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.

R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.

R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.

R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

M. Schuster, S.X. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

M. Schuster, S.X. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Ohotoinitiator";
Vortrag: RadTech Europe 2005, Barcelona, Spain (eingeladen); 18.10.2005 - 20.10.2005.

B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomer for the Investigation of Initiation Mechanism";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

G. Ullrich, S. Jauk, R. Liska, P. Burtscher, N. Moszner:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.

R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Vortrag: Seminar Fa. NBG Coatings, Wien; 20.09.2005.

R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Vortrag: Seminar Fa. NBG Coatings, Wien; 20.09.2005.

H. Lichtenegger, R. Liska, J. Stampfl:
"STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA)";
Vortrag: ISOTEC-Kickoff-Meeting, Reinischkogel, Österreich; 16.06.2005 - 18.06.2005.

R. Liska:
"Biophotopolymere für Rapid Prototyping";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel, Steiermark; 16.06.2005.

J. Stampfl, R. Liska, M. Spitzbart, S. Fischer, H. Noll:
"3D-Mikrostrukurerung funktionaler Materialien";
Vortrag: Mikrotechniktage Dornbirn 2005, Dornbirn; 22.03.2005 - 23.03.2005.

R. Liska:
"Photopolymere und ihre Anwendungen";
Vortrag: Technische Universität Graz, Graz (eingeladen); 08.03.2005.

R. Liska:
"Neue Photopolymere für Rapid Prototyping von zellularen Materialien";
Vortrag: 1. Wiener Biomaterialsymposium, Wien (eingeladen); 04.11.2004 - 05.11.2004.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal; 26.09.2004 - 30.09.2004.

Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-Mechanical Properties of Biomaterials, Tomar, Portugal; 26.09.2004 - 30.09.2004.

C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Junior Euromat 2004, Lausanne, Switzerland; 06.09.2004 - 09.09.2004.

H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: EUROMAT 2004, Lausanne, Schweiz; 06.09.2004 - 09.09.2004.

L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polifines: Studie on Model Compounds";
Poster: World Polymer Congress MACRO 2004, Paris, France; 04.07.2004 - 09.07.2004.

H. Lichtenegger, Ch. Fritscher, J. Stampfl, S. Seidler, N. Hüsing, R. Liska:
"3-D templating of hierarchical materials";
Vortrag: MRS Spring Meeting, San Francisco; 12.04.2004 - 16.04.2004.

R. Liska:
"Struktur und Reaktivität von Photoinitiatoren mit neuen Chromophoren";
Vortrag: Institut für Nanostrukturierte Materialien und Photonik, Joanneum Research, Weiz, Österreich (eingeladen); 29.10.2003.

R. Liska:
"Wasserlösliche Polymere für den Einsatz in Rapid Prototyping";
Vortrag: Technische Universität Wien - Institut für Werkstoffkunde und Materialprüfung, Wien (eingeladen); 27.08.2003.

T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Vortrag: VA TECH, Weiz (eingeladen); 28.01.2003.

N. Fuß, R. Liska:
"New type I photoinitiators based on ynone derivatives";
Poster: RadTech Europe 2001, Basel, Schweiz; 08.10.2001 - 10.10.2001.

D. Herzog, R. Liska:
"Electron poor heterocyclic type I photoinitiators";
Poster: RadTech Europe 2001, Basel, Schweiz; 08.10.2001 - 10.10.2001.

N. Fuß, R. Liska:
"New Enon- and Inon-besed Type I Photoinitiators";
Poster: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.

D. Herzog, R. Liska:
"New concepts for Type I Photoinitiators in Free Radical Polymerization";
Vortrag: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.

K. Lisak, R. Liska, S. Knaus:
"Photochemical Immobilization of Aryl Azides onto Polypropylene Surfaces";
Vortrag: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.

P. Müller, S. Pantschov, R. Liska, S. Knaus:
"Synthesis and Grafting of Novel Hindered Amine Light Stabilizers onto Polypropylene";
Poster: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.


Patente


R. Liska, P. Knaack, P. Gauss:
"Photoinitiatoren für lichthärtende Zusammensetzungen";
Patent: Österreich, Nr. A 313/2017; eingereicht: 27.07.2017.

N. Moszner, U. Fischer, P. Burtscher, R. Liska, P. Knaack, M. Mitterbauer:
"Polymerisierbare Zusammensetzungen mit Acylzinn-Photoinitiatoren";
Patent: EP, Nr. 16187716.2-1302; eingereicht: 07.09.2016, erteilt: 2017.

R. Liska, D. Bomze, W. Kern:
"Method for frontal polymerization of cationically polymerizable monomers";
Patent: Österreich, Nr. WO 2017035551; eingereicht: 02.09.2016, erteilt: 09.03.2017.

R. Liska, D. Bomze, I. Krossing, P. Knaack:
"Cationic radical or photochemical polymerization initiators";
Patent: Österreich, Nr. AT 517626; eingereicht: 02.09.2016, erteilt: 15.03.2017.

R. Liska, D. Bomze, I. Krossing, P. Knaack:
"Cationic radical or photochemical polymerization initiators";
Patent: Österreich, Nr. At 517626 (b1); eingereicht: 02.09.2016, erteilt: 15.06.2017.

N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: Japan, Nr. Jp6095665 (b2); eingereicht: 10.09.2012, erteilt: 15.03.2017.

N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: USA, Nr. Us9320686 (b2), US9668946 (B2); eingereicht: 10.09.2012, erteilt: 06.06.2017.

R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: Japan, Nr. Jp6101271 (b2); eingereicht: 03.09.2011, erteilt: 22.03.2017.

R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: USA, Nr. Us9623145 (b2); eingereicht: 03.09.2011, erteilt: 18.04.2017.

R. Liska, C. Gorsche, K. Seidler, N. Moszner:
"Sulfonsäureester als Regler in radikalischen Polymerisationsreaktionen";
Patent: Österreich, Nr. WO2016177677; eingereicht: 02.05.2016, erteilt: 10.11.2016.

N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Durch Kettenübertragungspolymerisation härtbare Dentalmaterialien";
Patent: Österreich, Nr. Wo2016177680 A1; eingereicht: 02.05.2016, erteilt: 10.11.2016.

N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: Mexiko, Nr. Mx341258 (b); eingereicht: 10.09.2012, erteilt: 09.08.2016.

R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: US, Nr. S2013084543 (a1) Wo2013052328 (a1) Kr20140076608 (a) Jp2014531503 (a) Ep2764049 (a1); eingereicht: 03.09.2011, erteilt: 05.05.2016.

R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: EP, Nr. Ep2764049 (b1); eingereicht: 03.09.2011, erteilt: 17.08.2016.

R. Liska, P. Knaack, D. Bomze, I. Krossing:
"Photoinitiator for cationic polymerization";
Patent: Österreich, Nr. At517626 (b1); eingereicht: 02.09.2015, erteilt: 15.06.2017.

R. Liska, D. Bomze, W. Kern:
"Novel method for curing of epoxy resins";
Patent: Österreich, Nr. ?; eingereicht: 01.09.2015.

R. Liska, C. Gorsche, K. Seidler, N. Moszner:
"Sulfonsäureester als Regler in radikalischen Polymerisationsreaktionen";
Patent: Österreich, Nr. Ep3091037 A1; eingereicht: 07.05.2015, erteilt: 09.11.2016.

N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Durch Kettenübertragungspolymerisation härtbare Dentalmaterialien";
Patent: Österreich, Nr. Ep3090722 A1; eingereicht: 07.05.2015, erteilt: 09.11.2016.

N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Japan, Nr. Jp5661596 (b2); eingereicht: 19.11.2010, erteilt: 28.01.2015.

R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: USA, Nr. Us8999323 (b2); eingereicht: 23.11.2007, erteilt: 07.04.2015.

N. Moszner, U. Fischer, I. Lamparth, P. Burtscher, R. Liska, C. Gorsche, K. Seidler, P. Gauss:
"Komposite mit gesteuerter Netzwerkstruktur";
Patent: EP, Nr. EP2965741A1; eingereicht: 11.07.2014, erteilt: 13.01.2016.

N. Moszner, U. Fischer, I. Lamparth, P. Burtscher, R. Liska, C. Gorsche, K. Seidler, P. Gauss:
"Komposite mit gesteuerter Netzwerkstruktur";
Patent: WO, Nr. Wo2016005534 A1; eingereicht: 11.07.2014, erteilt: 14.01.2016.

N. Moszner, K. Rist, I. Lamparth, P. Burtscher, C. Gorsche, R. Liska:
"Dentalmaterialien mit Debonding-on-Demand-Eigenschaften";
Patent: EP, Nr. Ep 2965740 A1; eingereicht: 11.07.2014, erteilt: 14.01.2016.

N. Moszner, K. Rist, I. Lamparth, P. Burtscher, C. Gorsche, R. Liska:
"Dentalmaterialien mit Debonding-on-Demand-Eigenschaften";
Patent: WO, Nr. Wo2016005540 A1; eingereicht: 11.07.2014, erteilt: 14.01.2016.

N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: China, Nr. Cn103781456 (b); eingereicht: 10.09.2012, erteilt: 07.05.2014.

N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Europa, Nr. Ep2455059 (b1); eingereicht: 19.11.2010, erteilt: 04.06.2014.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan, Nr. Jp5571917 (b2); eingereicht: 29.07.2009, erteilt: 13.08.2014.

R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: USA, Nr. US 8741203; eingereicht: 20.10.2008, erteilt: 03.06.2014.

R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: USA, Nr. Us8741203 (b2); eingereicht: 20.10.2008, erteilt: 03.06.2014.

R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: Japan, Nr. Jp5571090 (b2); eingereicht: 20.10.2008, erteilt: 13.08.2014.

N. Moszner, F. Zeuner, V. Rheinberger, I. Lamparth, U. Fischer, R. Liska:
"Polymerisable compound with multiple germanium atoms containing initiators";
Patent: USA, Nr. Us8829067 (b2) 2014-09-09; eingereicht: 20.03.2008, erteilt: 09.09.2014.

R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Europa, Nr. Ep2428235 (b1); eingereicht: 23.11.2007, erteilt: 04.06.2014.

N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: EP, Nr. Ep2753290 (a2); Us2014371341 (a1); Wo2013034777 (a3); eingereicht: 10.09.2012, erteilt: 14.03.2013.

N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: USA, Nr. Us8557888 (b2); eingereicht: 19.11.2010, erteilt: 15.10.2013.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Europa, Nr. Ep2151214 (b1); eingereicht: 29.07.2009, erteilt: 23.01.2013.

R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: Europa, Nr. Ep2337668 (b1); eingereicht: 20.10.2008, erteilt: 20.03.2013.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Lichthärtende Schlicker für die stereolithographische Herstellung von Dentalkeramiken";
Patent: Europa, Nr. EP2151214; eingereicht: 30.07.2008, erteilt: 23.01.2013.

N. Moszner, F. Zeuner, V. Rheinberger, I. Lamparth, U. Fischer, R. Liska:
"Polymerisable compound with multiple germanium atoms containing initiators";
Patent: Japan, Nr. Jp5366602 (b2); eingereicht: 20.03.2008, erteilt: 11.12.2013.

N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Ep, Us, Jp, Nr. Ep2455059 (a1); eingereicht: 19.11.2010, erteilt: 23.05.2012.

N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: Japan, Nr. Jp5097494 (b2); eingereicht: 27.09.2006, erteilt: 12.12.2012.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Japan, Nr. Jp4861413 (b2); eingereicht: 29.06.2006, erteilt: 25.01.2012.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: China, Nr. Cn101213070 (b); eingereicht: 30.06.2005, erteilt: 27.06.2012.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Japan, Nr. Jp4861413 (b2); eingereicht: 30.06.2005, erteilt: 25.01.2012.

P. Radovanovic, J. Matovic, R. Liska, M. Kellner:
"Herstellung asymmetrischer Membranen";
Patent: A, Nr. At511431 (b1); eingereicht: 01.06.2011.

R. Liska, P. Esfandiari:
"Stable Curable Thiol-Ene Formulation";
Patent: EU, Nr. Appl. No. 11159451.1; eingereicht: 23.03.2011.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: USA, Nr. Us7927538 (b2); eingereicht: 29.07.2009, erteilt: 19.04.2011.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Japan, Nr. 2008-518556; eingereicht: 29.06.2006, erteilt: 11.11.2011.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: USA, Nr. Us8022155 (b2); eingereicht: 29.06.2006, erteilt: 20.09.2011.

R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Internationales Patent, Nr. Wo 2006108202 A8, US erteilt (US 8,022,155 B2 20.8.2011); eingereicht: 10.04.2006, erteilt: 20.08.2011.

R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Österreich, Nr. At501700 (b1); eingereicht: 10.04.2006, erteilt: 15.03.2011.

R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: USA, Nr. Us8022155 (b2); eingereicht: 10.04.2006, erteilt: 20.09.2011.

R. Liska, M. Schuster, H. Gruber, J. Stampfl, F. Varga:
"Mit Strahlung härtbare, biologisch abbaubare Zusammensetzung und deren Verwendung als polymere Stützmaterialien für den Knochenersatz";
Patent: Österreich, Nr. AT 501700; eingereicht: 10.04.2005, erteilt: 15.03.2011.

R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Acrylamide mit Initiatoreigenschaften";
Patent: Österreich, EU, Nr. AT 504811 B1, Ep 1956033 B1,; eingereicht: 06.02.2007, erteilt: 15.06.2010.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping method and radiation-curable composition for use therein";
Patent: USA, Nr. Us 7 815 835 B2; eingereicht: 29.06.2006, erteilt: 29.10.2010.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Europa, USA, Nr. Us 7,815,835 B2 Ep 1 907 192 B1; eingereicht: 29.06.2006, erteilt: 19.10.2010.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: USA, Nr. Us7815835 (b2); eingereicht: 29.06.2006, erteilt: 19.10.2010.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: USA, Nr. Us7815835 (b2); eingereicht: 30.06.2005, erteilt: 19.10.2010.

N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: USA, Nr. Us7714034 (b2); eingereicht: 06.01.2005, erteilt: 11.05.2010.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan, Nr. JP2010031279 (a); eingereicht: 29.07.2009.

N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Light-curing slips for the stereolithographic preparation of dental ceramics";
Patent: USA, Nr. US 2010-0029801; eingereicht: 27.02.2009.

R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Eu, Usa, Jp, Ca, Nr. EP2219697; eingereicht: 21.11.2008, erteilt: 28.05.2009.

N. Moszner, F. Zeuner, V. Rheinberger, I. Lamparth, U. Fischer, R. Liska:
"Polymerisable compound with multiple germanium atoms containing initiators";
Patent: Eu, Usa, Jp, Nr. Ep2103297 (b1), Us8829067 (b2), Jp5366602 (b2); eingereicht: 20.03.2008, erteilt: 23.09.2009.

R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: WO, Nr. Wo 2009065162 A2; eingereicht: 23.11.2007, erteilt: 28.05.2009.

R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Methacrylamid-Derivate von Polysiloxanen";
Patent: EU, Nr. Ep 1956038 B1; eingereicht: 06.02.2007, erteilt: 23.09.2009.

N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: Eu, Usa, Jp, Nr. Ep 1905415 B1; Us7605190 B2; Jp2008088432; eingereicht: 27.09.2006, erteilt: 01.07.2009.

N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: USA, Nr. Us7605190 (b2); eingereicht: 27.09.2006, erteilt: 20.10.2009.

N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: Eu, Usa, Jp, Nr. Ep 1749513 B1; eingereicht: 06.01.2005, erteilt: 03.04.2009.

N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: Europa, Nr. Ep1749513 (b1); eingereicht: 06.01.2005, erteilt: 04.03.2009.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. A1106 / 05; eingereicht: 30.06.2005, erteilt: 15.09.2008.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. At502110 (b1); eingereicht: 30.06.2005, erteilt: 15.09.2008.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Europa, Nr. Ep1907192 (b1); eingereicht: 30.06.2005, erteilt: 19.11.2008.

R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich, Nr. At A19032007; eingereicht: 30.11.2007.

R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Europa, Nr. Ep2428235 (b1); eingereicht: 30.11.2007, erteilt: 04.06.2014.

R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich, Nr. At506168 (b1); eingereicht: 30.11.2007, erteilt: 15.02.2012.

R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: USA, Nr. Us8999323 (b2); eingereicht: 30.11.2007, erteilt: 07.04.2015.

R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: WO, Nr. Wo2007002965 (b1); eingereicht: 30.06.2005, erteilt: 19.04.2007.

J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Österreich, Nr. At501700 (b1); eingereicht: 29.06.2006, erteilt: 15.10.2006.

R. Liska, S. Jauk, H. Gruber:
"Photopolymerizable mixtures comprising photoinitiators based on benzophenone and phenylglycine";
Patent: Internationales Patent, Nr. WO 2006/108204 A1; eingereicht: 10.04.2006.

R. Liska, S. Jauk, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatorenauf Basis von Benzophenon und Phenylglycin";
Patent: Österreich, Nr. AT 501750; eingereicht: 10.04.2005, erteilt: 19.10.2006.

R. Liska, B. Seidl, H. Gruber:
"Photopolymerisable mixtures with photoinitiators based on di-ynone derivates";
Patent: Internationales Patent, Nr. PCT/AT2005/026840; eingereicht: 01.09.2004, erteilt: 24.03.2005.

R. Liska, B. Seidl, H. Gruber:
"Photopolymerisable mixtures with photoinitiators based on di-ynone derivates";
Patent: Österreich, Nr. At412346 (b); eingereicht: 01.09.2004, erteilt: 25.01.2005.

S. Jauk, A. Liska, S. Knaus, R. Liska, H. Gruber, J. Wendrinsky:
"Oberflächenmodifizierung von Polymeren mit funktionellen Aziden";
Patent: Österreich, Nr. AT 20030157; eingereicht: 01.04.2004, erteilt: 2005.

R. Liska, F. Schwager, H. Gruber, J. Stampfl:
"Mit Strahlung härtbare wasserlösliche Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. AT 412 399 (2004); eingereicht: 18.06.2003, erteilt: 15.07.2005.

H. Gruber, S. Knaus, S. Jauk, A. Liska, R. Liska, J. Wendrinsky:
"Grafting of polymers for coating with metals";
Patent: Europa, Nr. EP 1471084 A2; eingereicht: 31.03.2004, erteilt: 27.10.2004.

H. Gruber, S. Knaus, A. Liska, R. Liska, P. Sulek, J. Wendrinsky, P. Sattler:
"Polymers for moldings with good surface metalizabilty";
Patent: Europa, Nr. EP 1443063 A1; eingereicht: 30.01.2004, erteilt: 04.08.2004.

R. Liska, B. Seidl, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatoren auf Basis von Di-inon-Derivaten";
Patent: Österreich, Nr. AT 412 346 (2004); eingereicht: 09.12.2003, erteilt: 04.11.2004.

J. Stampfl, F. Schwager, R. Liska, S. Seidler, H. Gruber:
"Mit Strahlung härtbare wasserlösliche und/oder schmelzbare Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. 412.399; eingereicht: 18.06.2003, erteilt: 15.07.2004.

R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Bonding the surface of polyimides to other resins";
Patent: Österreich, Nr. At 500472 A1; eingereicht: 03.09.2003.

R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Polymers containing imide groups and bearing immobilized catalysts";
Patent: Österreich, Nr. At 500471 A1; eingereicht: 03.09.2003.

P. Sulek, S. Knaus, R. Liska, A. Liska, H. Gruber, J. Wendrinsky:
"Neue Polymere bzw. gefertigte Gegenstände, Formkörper od. dgl., Verfahren zu deren Herstellung von metallisierten Gegenständen od. dgl. daraus";
Patent: Österreich, Nr. AT 20030124; eingereicht: 31.01.2003.


Habilitationsschriften


R. Liska:
"New concepts in photopolymerization";
Technische Universität Wien / Fakultät für Technische Chemie, 2006.


Dissertationen (eigene und begutachtete)


D. Bomze:
"Radical induced Cationic Frontal Polymerization as a new and versatile Curing Technique for Epoxy Resins";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, P. Knaack; Institut für Angewandte Sythesechemie, 2016; Rigorosum: 20.10.2016.

K. Seidler:
"Photopolymer Networks with Homogeneous Polymer Architectures";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche; Institut für Angewandte Synthesechemie, 2016; Rigorosum: 20.10.2016.

P. Potzmann:
"Energy Efficient UV Polymerization in Aqueous Systems";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2016; Rigorosum: 24.05.2016.

S. Benedikt:
"Novel Long-Wavelength Photoinitiators for Dental Applications";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2015; Rigorosum: 01.11.2015.

C. Gorsche:
"Synthesis and characterization of monomers and additives for photopolymer-based dental restoratives";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2015; Rigorosum: 05.03.2015.

G. Mitteramskogler:
"Selektives Einfärben von 3D-gedruckten Bauteilen aus ZrO2";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2015; Rigorosum: 05.03.2015.

X.H. Qin:
"3D Construction of Artificial ECM Hydrogels by Two-Photon-Induced Polymerization";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, H. Redl, P. Gärtner; Institut für angewandte Synthesechemie, 2014; Rigorosum: 27.05.2014.

M. Hatzenbichler:
"Selektives Laserschmelzen zur generativen Herstellung von Bauteilen aus Hochleistungswerkstoffen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2014; Rigorosum: 07.03.2014.

S. Gruber:
"Lithography-based additive manufacturing of alumina parts";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstffwissenschaft und Werkstofftechnologie, 2013; Rigorosum: 13.12.2013.

C. Schoberleitner:
"Entwicklung einer Werkstoffformulierung zur Robotersanierung von undichten Muffen in Trinkwasserversorgungsleitungen";
Betreuer/in(nen), Begutachter/in(nen): V. Archodoulaki, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2013; Rigorosum: 20.11.2013.

Z. Li:
"Novel Organic Materials for Multi-photon Photopolymerization and Photografting: Powerful Tools for Precise Microfabracation and Functionalization in 3D";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2013; Rigorosum: 11.11.2013.

M. Kellner:
"Entwicklung neuer Materialien für protonenleitende Membranen in Brennstoffzellen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, V. Archodoulaki; Institut für Angewandte Synthesechemie, 2013; Rigorosum: 30.10.2013.

J. Torgersen:
"Novel biocompatible materials for in situ two-photon polymerisation";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2013; Rigorosum: 21.03.2013.

J. Kupfmüller:
"Strukturierung Polysiloxan-basierender Wellenleitermaterialien mittels 2-Photonen-induzierter Polymerisation";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2013; Rigorosum: 06.03.2013.

R. Markut-Kohl:
"Stucture-properties correlations in PE-UHMW: influence of consolidation, crosslinking, sterilization and in vivo use on hip implants";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, R. Liska; Werkstoffwissenschaft und Werkstofftechnologie, 2012; Rigorosum: 11.10.2012.

P. Tesavibul:
"Manufacturing and fixation of oxide-ceramic implants using additive manufacturing and light curing bio-adhesives";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2012; Rigorosum: 10.08.2012.

A. Mautner:
"Development of low cytotoxic Photopolymers";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2012; Rigorosum: 09.08.2012.

A. Ajami:
"Two‐photon Modification of materials with ultrashort laser radiation: Z‐scan measurements and 3D‐modification of selected materials";
Betreuer/in(nen), Begutachter/in(nen): W. Husinsky, R. Liska; Institut für Angewandte Physik (IAP), 2012; Rigorosum: 27.06.2012.

M. Schwentenwein:
"Development of Tough Photopolymers for Lithography-based Additive Manufacturing Technologies";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2012; Rigorosum: 11.04.2012.

A. Gugg:
"Development of Monomers and Additives for Advanced Dental Formulations";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2011; Rigorosum: 10.11.2011.

K. Stadlmann:
"Herstellung von Lichtwellenleitern mittels Zweiphotonenlithographie";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Rigorosum: 10.11.2011.

J. Patzer:
"Generative Fertigung von keramischen Bauteilen für dentale Anwendungen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Rigorosum: 14.04.2011.

P. Esfandiari:
"Development of 3-D printable materials";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2011; Rigorosum: 17.01.2011.

S. Baudis:
"Development and Processing of Materials for Vascular Tissue Regeneration";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institu für angewandte Synthesechemie, 2011; Rigorosum: 11.01.2011.

N.U Pucher:
"Synthesis and Evaluation of Novel Initiators for the Two-Photon Induced Photopolymerization Process - A Precise Tool for Real 3D Sub-Micrometer Laser Structuring";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2010; Rigorosum: 14.06.2010.

C. Heller:
"Biocompatible and Biodegradable Photopolymers by Additive Manufacturing: From Synthesis to In-Vivo Studies";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; TU Wien, 2010; Rigorosum: 26.04.2010.

M. Höfer:
"Components for visible curable formulations with low oxygen inhibition";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2010; Rigorosum: 18.01.2010.

C. Dworak:
"Novel Concepts For Photoinitiating Moieties";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl; Institut für angewandte Synthesechemie, 2009; Rigorosum: 23.11.2009.

R. Inführ:
"Mechanisch flexible Wellenleitermaterialien für die 3D-Strukturierung mit 2-Photonenpolymerisation";
Betreuer/in(nen), Begutachter/in(nen): H. Lichtenegger, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2008; Rigorosum: 29.10.2008.

M. Schuster:
"Photopolymers for bone tissue engeneering";
Betreuer/in(nen), Begutachter/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Rigorosum: 16.06.2008.

S. Jauk:
"Kovalent verbundene Typ II Photoinitiatoren";
Betreuer/in(nen), Begutachter/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Rigorosum: 03.04.2008.

B. Ganster:
"Bathochrom verschobene Photoinitiatoren für Dentalformulierungen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Rigorosum: 14.01.2008.

S. Kopeinig:
"Synthese und Untersuchung photopolymerisierbarer Gruppen für Silikonbeschichtungen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, H. Hutter; E163, 2007.


Diplom- und Master-Arbeiten (eigene und betreute)


S. Helfert:
"Synthesis and Characterization of Polymer-Linker Systems for T-cell Activation";
Betreuer/in(nen): R. Liska, C. Dworak, E. Sevcsik; Institut für Angewandte Synthesechemie E-163, 2017; Abschlussprüfung: 31.03.2017.

N. Klikovits:
"Cationic Photoinitiators based on Aluminium";
Betreuer/in(nen): R. Liska, P. Knaack; Institut für Angewandte Synthesechemie E-163, 2017; Abschlussprüfung: 27.03.2017.

E. Zerobin:
"Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering";
Betreuer/in(nen): R. Liska, S. Baudis; Institut für Angewandte Synthesechemie, 2017; Abschlussprüfung: 22.03.2017.

Y. Mete:
"Photopolymerization in filled systems";
Betreuer/in(nen): R. Liska, P. Knaack; Institut für Angewandte Synthesechemie, 2017; Abschlussprüfung: 27.02.2017.

G. Peer:
"New monomers for radical photopolymerization";
Betreuer/in(nen): R. Liska, C. Gorsche; Institut für Angewandte Synthesechemie, 2017; Abschlussprüfung: 27.01.2017.

M. Kury:
"Mechanistic investigations of chain transfer reagents";
Betreuer/in(nen): R. Liska, C. Gorsche; Institut für Angewandte Synthesechemie, 2016; Abschlussprüfung: 18.11.2016.

C. Schnöll:
"Investigation of various blocked isocyanates for Debonding on Demand";
Betreuer/in(nen): R. Liska, C. Gorsche; Institut für Angewandte Synthesechemie, 2016; Abschlussprüfung: 17.03.2016.

J. Steindl:
"Kettentransferreagenzien auf Basis von Silizium";
Betreuer/in(nen): R. Liska, C. Gorsche; Institut für Angewandte Synthesechemie, 2016; Abschlussprüfung: 17.03.2016.

M. Mitterbauer:
"Synthesis of novel Si-based long wavelength photoinitiators for dental applications";
Betreuer/in(nen): R. Liska; Institut für Angewandte Synthesechemie, 2016; Abschlussprüfung: 25.01.2016.

L. Heißenberger:
"Biodegradable thermoplastic polyurethanes for vascular tissue regeneration: synthesis of alternative/new building blocks";
Betreuer/in(nen): R. Liska, C. Dworak; Institut für Angewandte Synthesechemie E-163, 2015; Abschlussprüfung: 03.12.2015.

S. Orman:
"Biocompatible Composite Photopolymers for 3D Printing";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für angewandte Synthesechemie, 2015; Abschlussprüfung: 22.04.2015.

Z. Tomasikova:
"Hydrogels for Tissue Engineering";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Redl; Institut für angewandte Synthesechemie, 2015; Abschlussprüfung: 22.04.2015.

S. Baumgartner:
"3D-Printing of therapeutic nano-particles";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2015; Abschlussprüfung: 26.03.2015.

P. Gauss:
"RAFT and AFCT in Debonding on Demand of Dental Materials";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für angewandte Synthesechemie, 2014; Abschlussprüfung: 25.11.2014.

N. Zwirchmayr:
"Synthesis of segmented linear thermoplastic urethane elastomers for electrospinning of vascular grafts";
Betreuer/in(nen): R. Liska, W. Linert, H. Hutter; Institut für angewandte Synthesechemie, 2014; Abschlussprüfung: 28.07.2014.

C. Balka:
"Optimierung Zirkonoxidgefüllter Photopolymere für den 3D-Druck";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2014; Abschlussprüfung: 07.03.2014.

C. Hofstetter:
"Prozessoptimierung für lithographiebasierte generative Fertigung";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2014; Abschlussprüfung: 07.03.2014.

M. Leitgeb:
"Herstellung und Charakterisierung flexibler Stempel für R2R-Nanoprägen";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für angewandte Synthesechemie, 2014; Abschlussprüfung: 06.03.2014.

M. Tromayer:
"Novel Multipolar Initiators for Two-Photon Induced Photopolymerization";
Betreuer/in(nen): R. Liska, J. Stampfl, P. Gärtner; Institut für angewandte Synthesechemie, 2014; Abschlussprüfung: 06.03.2014.

D. Bomze:
"Modication of Poly(vinyl alcohol) for Two Photon Polymerisation via Thiol-Ene Chemistry";
Betreuer/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2013; Abschlussprüfung: 28.10.2013.

F. Höller:
"Laser Microfabrication of Elastic 3D Scaffolds";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2013; Abschlussprüfung: 25.06.2013.

P. Potzmann:
"New building blocks for thermoplastic polyurethane elastomers for vascular tissue engineering";
Betreuer/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2013; Abschlussprüfung: 06.03.2013.

B. Feyerabend:
"Alternative Polymerwerkstoffe zum PTFE. Eigenschaftsspezifische und anwendungsorientierte Betrachtungen unter dem Aspekt einer möglichen Werkstoffsubstitution";
Betreuer/in(nen): V. Archodoulaki, R. Liska; Werkstoffwissenschaft und Werkstofftechnologie, 2013; Abschlussprüfung: 25.02.2013.

P. Dorfinger:
"Lithographiebasierte Herstellung metallischer Bauteile";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2013; Abschlussprüfung: 31.01.2013.

K. Seidler:
"Development of biodegradable thermoplastic polyurethane elastomers for electrospinning of vascular grafts";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für Angewandte Synthesechemie, 2012; Abschlussprüfung: 21.12.2012.

F. Schacherreiter:
"Fertigung von Scaffolds aus Biophotoelastomeren mittels Zweiphotonenpolymerisation";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Abschlussprüfung: 05.12.2011.

T. Swetly:
"Generative Fertigung von Bauteilen aus Siliziumnitrid";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Abschlussprüfung: 21.10.2011.

G. Mitteramskogler:
"Generative Fertigung von Bauteilen aus TCP";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Abschlussprüfung: 23.05.2011.

C. Gorsche:
"UV-initiated Frontal Polymerization in Dental Materials";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für angewandte Synthesechemie, 2011; Abschlussprüfung: 27.04.2011.

S. Springer:
"Generative Fertigung von Bauteilen aus Al2O3";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2011; Abschlussprüfung: 10.03.2011.

S. Gruber:
"Fabrication and Evaluation of Multi-material structures made by additive manufacturing";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2010; Abschlussprüfung: 13.10.2010.

F. Oberleiter:
"Optimierung spritzbarer Biokomposit Materialien";
Betreuer/in(nen): J. Stampfl, R. Liska; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2010; Abschlussprüfung: 29.03.2010.

J. Torgersen:
"In-Vivo-Writing using Two-Photon Lithography";
Betreuer/in(nen): J. Stampfl, R. Liska; TU Wien, 2010; Abschlussprüfung: 24.03.2010.

J. Kumpfmüller:
"Strukturierung Polysiloxan-basierender Wellenleitermaterialien mittels 2-Photonen-induzierter Polymerisation";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter; Institut für angewandte Synthesechemie, 2010; Abschlussprüfung: 11.01.2010.

M. Schwentenwein:
"New monomers for tissue engineering by stereolithography";
Betreuer/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2008; Abschlussprüfung: 17.11.2008.

A. Gugg:
"Photoinitiatoren auf Basis von Halbmetallen";
Betreuer/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Abschlussprüfung: 09.06.2008.

S. Krivec:
"Porous Hybrid Materials as Carrier for Polymeric Waveguides";
Betreuer/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Abschlussprüfung: 09.06.2008.

S. Landertshamer:
"Photoinitiatoren für die kationische Polymerisation von Siliconen";
Betreuer/in(nen): R. Liska; E163, Institut für angewandte Synthesechemie, 2008; Abschlussprüfung: 09.06.2008.

S. Baudis:
"Development of biophotopolymers as biocompatible cardiovascular replacement materials";
Betreuer/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2007; Abschlussprüfung: 12.11.2007.

C. Heller:
"Synthese und Prüfung neuer Alkin-basierender Photoinitiatoren";
Betreuer/in(nen): R. Liska; Technische Universität Wien / Fakultät für Technische Chemie, 2007; Abschlussprüfung: 08.01.2007.

J. Leiter:
"Hybrid Photopolymere für Rapid Prototyping";
Betreuer/in(nen): R. Liska, J. Stampfl; Institut für Angewandte Synthesechemie, 2007; Abschlussprüfung: 08.01.2007.

J. Leitner:
"Hybrid Photopolymere für Rapid Prototyping";
Betreuer/in(nen): R. Liska; Technische Universität Wien / Fakultät für Technische Chemie, 2007; Abschlussprüfung: 08.01.2007.

N.U Pucher:
"Synthese neuer Photoinitiatoren für die Zwei-Photonen-induzierte Stereolithographie";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006; Abschlussprüfung: 13.11.2006.

Ch. Straif:
"Novel Coatings Systems for Space Enviromental Protection of High Performance Polymers";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006; Abschlussprüfung: 13.11.2006.

C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006; Abschlussprüfung: 07.06.2006.

M. Höfer:
"Reaktionen mit Singulettsauerstoff";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006; Abschlussprüfung: 24.04.2006.

C. Pich:
"Sauerstoffinhibierung in Silicone Release Coatings";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006; Abschlussprüfung: 24.04.2006.

A. Zimmermann:
"Funktionelle Tenside als Temlplate für Sol-Gel-Prozesse";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2006.

B. Ganster:
"Hydrophile Photoinitiatoren für Dentalformulierungen";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2005.

R. Inführ:
"Entwicklung von Photopolymeren für Rapid Prototyping zur Herstellung von zellularen organolöslichen Abformmaterialien";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2005.

K. Kalinyaprak-Icten:
"Kreuzkonjugierte Photoinitiatoren";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2005.

M. Schuster:
"Photopolymerisierbare Biopolymere für Knochenersatzmaterialien";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2005.

H. Wiesbauer:
"Photochemische Modifizierung von Polymeren mittels funktioneller Maleinimide";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2005.

N. Fuß:
"Synthese und photochemische Eigenschaften neuer Enon- und Inon-artiger Typ I- Photoinitiatoren";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2004.

S. Kopeinig:
"Photoinitiatoren mit kovalent verknüpften Sensibilisatoren";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2004.

F. Schwager:
"Wasserlösliche Polymere für Rapid Prototyping Verfahren";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2003.

B. Seidl:
"Synthese und Prüfung neuer Inon-artiger Photoinitiatoren";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2002.

G. Ullrich:
"Funktionelle Photoinitiatoren für den Einsatz in der Dentaltechnik";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2002.

T. Verdianz:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Betreuer/in(nen): R. Liska; E163 Institut für Angewandte Synthesechemie, 2002.


Wissenschaftliche Berichte


S. Gruber, J. Stampfl, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Berichts-Nr. ISSN: 1614-0923, 2011.

P. Esfandiari, R. Liska:
"Synthesis of new components I";
Bericht für Huntsman; 2010; 9 S.

P. Esfandiari, R. Liska:
"Synthesis of new components II";
Bericht für Huntsman; 2010; 12 S.

A. Gugg, R. Liska:
"Reaktivitäten spezieller Formulierungen";
Bericht für Ivoclar Vivadent; 2010; 35 S.

A. Mautner, R. Liska:
"Herstellung von Probekörpern";
Bericht für Synthes; 2010; 30 S.

A. Mautner, R. Liska:
"Mechanische Eigenschaften";
Bericht für Synthes; 2010; 64 S.

P. Esfandiari, R. Liska:
"Interaction of Additives in Photopolymerizable Formulations";
Bericht für Huntsman; 2009; 13 S.

P. Esfandiari, R. Liska:
"Molecular Weight distribution in Photopolymerizable Formulations";
Bericht für Huntsman; 2009; 11 S.

P. Esfandiari, R. Liska:
"Photo-DSC of new Formulations";
Bericht für Huntsman; 2009; 9 S.

P. Esfandiari, R. Liska:
"Rheological Investigations of new Formulations";
Bericht für Huntsman; 2009; 13 S.

A. Gugg, R. Liska:
"Lagerstabilitätsuntersuchungen für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2009; 24 S.

A. Gugg, R. Liska:
"Molekulargewichtsbestimmung";
Bericht für Ivoclar Vivadent; 2009; 17 S.

A. Gugg, R. Liska:
"Reaktivitätsmessungen spezieller Formulierungen";
Bericht für Ivoclar Vivadent; 2009; 19 S.

A. Gugg, R. Liska:
"Synthese neuer Monomere für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2009; 20 S.

A. Mautner, R. Liska:
"Evaluierung unterschiedlicher Polymere";
Bericht für Synthes; 2009; 21 S.

P. Esfandiari, R. Liska:
"Development of monomer formulation for RP";
Bericht für Huntsman; 2008; 14 S.

P. Esfandiari, R. Liska:
"Evaluation of new Formulations";
Bericht für Huntsman; 2008; 20 S.

P. Esfandiari, R. Liska:
"Screening of additives for RP";
Bericht für Huntsman; 2008; 7 S.

P. Esfandiari, R. Liska:
"State of the art in Rapid prototyping formulations";
Bericht für Huntsman; 2008; 11 S.

P. Esfandiari, R. Liska:
"Synthesis of new monomers";
Bericht für Huntsman; 2008; 16 S.

A. Gugg, R. Liska:
"Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent AG; 2008; 15 S.

A. Gugg, R. Liska:
"Acylgermaniumverbindungen II";
Bericht für Ivoclar Vivadent AG; 2008; 16 S.

A. Gugg, R. Liska:
"Neue Konzepte für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2008; 14 S.

S. Landertshamer, R. Liska:
"Hydrophobe Komponenten für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik; 2008; 17 S.

S. Landertshamer, R. Liska:
"Photoinitiatoren für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik; 2008; 14 S.

R. Liska:
"Bericht für FWF: Photoinitiatoren mit kreuz-konjugiertem System - P18623-N17";
Bericht für FWF; 2008; 8 S.

R. Liska:
"Photoinitiatoren mit ß-phenyloger Spaltung - P19769-N14";
Bericht für FWF; 2008; 8 S.

R. Liska:
"Cross-conjugated Photoinitiators";
Bericht für FWF; Berichts-Nr. FWF (P18623-N17), 2007; 5 S.

R. Liska:
"Photochemie von Diynonen - Zwischenbericht";
Bericht für FWF; Berichts-Nr. FWF (Projekt P18623-N17), 2007; 13 S.

R. Liska, B. Ganster:
"Photochemie bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 49 S.

R. Liska, B. Ganster:
"Photolysestudien an bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 15 S.

R. Liska, B. Ganster:
"Photoprodukte aus bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 27 S.

R. Liska, B. Ganster, A. Gugg:
"Photoinitiatoren auf Basis von Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent; 2007; 17 S.

R. Liska, S. Landertshamer:
"Synthese neuer Sensitizer für die kationische Polymerisation";
Bericht für Evonik Goldschmidt; 2007; 19 S.

C. Haderer, R. Liska, S. Knaus, H. Gruber:
"Immobilisierte Fluoreszenssensoren für die extrakorporale Blutreinigung";
Bericht für Donau Universität, Krems; 2006; 75 S.

R. Liska, B. Ganster:
"Photoinitiatoren mit Absorption im Vis-Bereich";
Bericht für Ivoclar Vivadent; 2006; 25 S.

R. Liska, B. Ganster:
"Synthese bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2006; 24 S.

R. Liska, C. Haderer:
"Synthese von Fluoreszenzsensoren";
Bericht für Donauuniversität Krems, Center for Biomedical Technology; 2006; 13 S.

R. Liska, M. Höfer:
"Endoperoxide mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent; 2006; 26 S.

R. Liska, S. Kopeinig:
"Equilibrierungsreaktionen in Siliconharzen";
Bericht für NBG Coatings; 2006; 29 S.

R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für Ivoclar Vivadent; 2006; 28 S.

R. Liska, S. Kopeinig:
"Modellverbindungen für Polysiloxane";
Bericht für NBG Special Coatings; 2006; 18 S.

R. Liska:
"Biophotopolymere für Rapid Prototyping";
Bericht für ISOTEC Projekt Meeting; 2005; 10 S.

R. Liska, B. Ganster:
"Lagerstabilitäts- und Reaktivitätsuntersuchungen neuer Typ I Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2005; 12 S.

R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2005; 29 S.

R. Liska, B. Ganster:
"Photoinitiatoren mit hydrophilen Gruppen";
Bericht für Ivoclar Vivadent; 2005; 15 S.

R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Bericht für Donauuniversität Krems, Center for Biomedical Technology; 2005; 22 S.

R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent; 2005; 19 S.

R. Liska, S. Knaus, H. Gruber:
"Functionalization of PTHF";
Bericht für Elemntis; 2005.

R. Liska, S. Knaus, H. Gruber:
"Viscosity Measurements";
Bericht für Elementis; 2005.

R. Liska, S. Kopeinig:
"Äqulibrierung von Polysiloxanen";
Bericht für NBG; 2005; 13 S.

R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Bericht für NBG Coatings; 2005; 8 S.

R. Liska, S. Kopeinig:
"Synthese modifizierter Polysiloxane";
Bericht für NBG; 2005; 17 S.

R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Bericht für NBG Coatings; 2005; 6 S.

R. Liska, C. Pich:
"Neue Photoinitiatoren für Silkonacrylate";
Bericht für NBG; 2005; 26 S.

R. Liska, C. Pich:
"Photoreaktivität von Silkonacrylaten";
Bericht für NBG; 2005; 39 S.

R. Liska, G. Ullrich:
"Evaluierung von Photoinitiatoren in wässrigen Primerformulierungen";
Bericht für Ivoclar Vivadent; 2005; 11 S.

R. Liska, G. Ullrich:
"Prüfung der Lagerstabilität neuer Typ I Initiatoren für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2005; 12 S.

R. Liska, B. Ganster:
"Synthese neuer Typ I Initiatoren für die Photopolymerisation im sichtbaren Lichtbereich";
Bericht für Ivoclar Vivadent; 2004.

R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für NBG Coatings; 2004.

R. Liska, C. Pich:
"Analyse von Siliconacrylaten";
Bericht für NBG Coatings; 2004.

R. Liska, C. Pich:
"Reduktion der Sauerstoffinhibierung in Siliconacrylaten";
Bericht für NBG Coatings; 2004.

R. Liska, G. Ullrich:
"Synthese alpha-spaltender Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2004.

R. Liska, G. Ullrich:
"Synthese und Prüfung neuer Diinone als Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2004.

R. Liska, G. Ullrich:
"Thiouroniumverbindungen für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2004.

R. Liska, G. Ullrich:
"Aromatische Amine und Phenylglycinderivate als Coinitiatoren für Campherchinon";
Bericht für Ivoclar Vivadent; 2003.

R. Liska, G. Ullrich:
"Evaluierung verschiedener Coinitiatoren für Campherchinon in der Photopolymerisation";
Bericht für Ivoclar Vivadent; 2003.

R. Liska, G. Ullrich:
"Photochemisch spaltbare Schutzgruppen für N-Phenylglycine";
Bericht für Ivoclar Vivadent; 2003.

R. Liska, G. Ullrich:
"Synthese und Prüfung modifizierter N-Phenylglycinderivate für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2003.

T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Bericht für VA TECH; 2003.

D. Herzog, R. Liska:
"Synthese und Prüfung funktioneller Campherchinone";
Bericht für IVOCLAR AG; 2002.

F. Schwager, R. Liska:
"Wasserlösliche Polymere für Rapid Prototyping biometrischer Werkstoffe";
Bericht für Institut für Werkstoffkunde und Materialprüfung - TU Wien; 2002.

G. Ullrich, R. Liska:
"Struktur/Reaktivitätsuntersuchungen an Photoinitiatoren in der Dentaltechnik";
Bericht für IVOCLAR AG; 2002.

T. Verdianz, R. Liska:
"Oberflächenmodifizierung von lackierten Kupferdrähten für verbesserte Härtungs- und Haftungseigenschaften mit der umgebenden Harzmatrix";
Bericht für VA TECH ELIN EBG Motoren; 2002.